Details
-
Improvement
-
Resolution: Fixed
-
Minor
-
None
-
None
Description
Summary
Hardware health and PoE for Alcatel-Lucent OmniSwitch on AOS 6 (aos) and AOS 7/8 (aos7): fans, PSU/module/CMM operational status, chassis temperature status, PSU power, PoE PSE group power/status, and per-port PoE power and status. Before this, these switches had no status entities, no fan readings and no PoE data.
Patch: 04-alcatel-aos.patch (attached). Apply from the Observium root with patch -p1 < 04-alcatel-aos.patch. It was built against trunk SVN BASE and applies cleanly. All referenced vendor MIBs (ALCATEL-ENT1-CHASSIS-MIB, ALCATEL-ENT1/IND1-INLINE-POWER-MIB) already ship with Observium.
What it adds
- Fans: status (alaChasEntPhysFanStatus), plus RPM where the platform reports it.
- Entity operational status (chasEntPhysOperStatus) for PSUs, fans, modules and CMMs. notPresent is excluded and unpowered/down alert.
- Chassis temperature status (chasEntTempStatus, chasTempRange).
- PSU output power, where reported.
- Chassis temperature sensor: the description now uses entPhysicalName, so virtual-chassis members are distinguishable, and min = 0 because absent VC members report 0.
- PoE:
- PSE group power and status.
- Per-port power, with limit_high = alaPethPsePortPowerMaximum.
- Per-port detection status.
Files
| File | Status | Purpose |
|---|---|---|
| includes/definitions/mibs/alcatel.inc.php | changed | New state maps; ENT1/IND1-INLINE-POWER-MIB definitions; chassis temperature description |
| includes/definitions/os/alcatel.inc.php | changed | INLINE-POWER MIBs added to aos and aos7 |
| includes/discovery/sensors/alcatel-ent1-chassis-mib.inc.php | new | Fans, entity statuses, temperature status, PSU power |
| includes/discovery/sensors/alcatel-ent1-inline-power-mib.inc.php | new | PoE groups and per-port power/status |
| includes/discovery/sensors/alcatel-ind1-chassis-mib.inc.php | new | AOS 6 wrapper, includes the ENT1 file |
| includes/discovery/sensors/alcatel-ind1-inline-power-mib.inc.php | new | AOS 6 wrapper, includes the ENT1 file |
Design notes
- PoE port index mapping. AOS indexes PoE by group (chassis-1)1000 + slot, while ifIndex is (chassis-1)*100000 + slot*1000 + port. That's why the generic POWER-ETHERNET-MIB is deliberately *not enabled for aos7: it would map PoE values to the wrong ports.
- PoE "fault" is mapped to ignore. AOS reports fault for any non-PoE device linked to a PoE port (the invalid-signature counter increments). Real overloads are caught by the per-port power limit instead.
- Fan RPM: OS6860E reports 0 rpm for every fan, so only fan status is used there. OS6560 and OS6900 report real RPM.
Testing
- AOS 8: OS6860E, OS6560 and OS6900, including a virtual chassis. AOS 6: a stackable OmniSwitch.
- During testing the new entities caught a real unpowered PSU and a stopped fan.
- php -l clean.