--- a/includes/definitions/mibs/alcatel.inc.php
+++ b/includes/definitions/mibs/alcatel.inc.php
@@ -26,15 +26,76 @@
 $config['mibs'][$mib]['mib_dir'] = 'alcatel-ent1';
 $config['mibs'][$mib]['descr'] = '';
 
+// Index is the CMM entPhysicalIndex (65 = 1/CMM-A, 66 = 2/CMM-A in a virtual chassis)
 $config['mibs'][$mib]['sensor'][] = [
   'oid'                 => 'chasEntTempCurrent',
   'class'               => 'temperature',
-  'descr'               => 'Chassis',
+  'descr'               => 'Chassis %entPhysicalName%',
+  'oid_extra'           => [ 'ENTITY-MIB::entPhysicalName' ],
+  'entPhysicalIndex'    => '%index%',
   'oid_num'             => '.1.3.6.1.4.1.6486.801.1.1.1.1.1.2.1.1',
   'oid_limit_high_warn' => 'chasEntTempThreshold',
   'oid_limit_high'      => 'chasEntTempDangerThreshold',
+  'min'                 => 0, // not present VC members report 0
 ];
 
+// Fans, entity operational statuses, chassis temperature status and PSU power
+// are discovered in includes/discovery/sensors/alcatel-ent1-chassis-mib.inc.php
+$type = 'alaChasEntPhysFanStatus';
+$config['mibs'][$mib]['states'][$type][0] = [ 'name' => 'noStatus',   'event' => 'exclude' ];
+$config['mibs'][$mib]['states'][$type][1] = [ 'name' => 'notRunning', 'event' => 'alert' ];
+$config['mibs'][$mib]['states'][$type][2] = [ 'name' => 'running',    'event' => 'ok' ];
+
+$type = 'chasEntPhysOperStatus';
+$config['mibs'][$mib]['states'][$type][1]  = [ 'name' => 'up',         'event' => 'ok' ];
+$config['mibs'][$mib]['states'][$type][2]  = [ 'name' => 'down',       'event' => 'alert' ];
+$config['mibs'][$mib]['states'][$type][3]  = [ 'name' => 'testing',    'event' => 'warning' ];
+$config['mibs'][$mib]['states'][$type][4]  = [ 'name' => 'unknown',    'event' => 'warning' ];
+$config['mibs'][$mib]['states'][$type][5]  = [ 'name' => 'secondary',  'event' => 'ok' ];
+$config['mibs'][$mib]['states'][$type][6]  = [ 'name' => 'notPresent', 'event' => 'exclude' ];
+$config['mibs'][$mib]['states'][$type][7]  = [ 'name' => 'unpowered',  'event' => 'alert' ];
+$config['mibs'][$mib]['states'][$type][8]  = [ 'name' => 'master',     'event' => 'ok' ];
+$config['mibs'][$mib]['states'][$type][9]  = [ 'name' => 'idle',       'event' => 'ok' ];
+$config['mibs'][$mib]['states'][$type][10] = [ 'name' => 'pwrsave',    'event' => 'ok' ];
+
+$type = 'chasEntTempStatus';
+$config['mibs'][$mib]['states'][$type][1] = [ 'name' => 'unknown',             'event' => 'ignore' ];
+$config['mibs'][$mib]['states'][$type][2] = [ 'name' => 'notPresent',          'event' => 'exclude' ];
+$config['mibs'][$mib]['states'][$type][3] = [ 'name' => 'underThreshold',      'event' => 'ok' ];
+$config['mibs'][$mib]['states'][$type][4] = [ 'name' => 'overFirstThreshold',  'event' => 'warning' ];
+$config['mibs'][$mib]['states'][$type][5] = [ 'name' => 'overDangerThreshold', 'event' => 'alert' ];
+
+$mib = 'ALCATEL-ENT1-INLINE-POWER-MIB';
+$config['mibs'][$mib]['enable'] = 1;
+$config['mibs'][$mib]['identity_num'] = '.1.3.6.1.4.1.6486.801.1.2.1.27.1';
+$config['mibs'][$mib]['mib_dir'] = 'alcatel-ent1';
+$config['mibs'][$mib]['descr'] = 'Alcatel-Lucent AOS 7/8 PoE (per port power, PSE groups).';
+
+// Per port power and statuses are discovered in includes/discovery/sensors/alcatel-ent1-inline-power-mib.inc.php
+$type = 'alaPethMainPseAdminStatus';
+$config['mibs'][$mib]['states'][$type][1] = [ 'name' => 'on',  'event' => 'ok' ];
+$config['mibs'][$mib]['states'][$type][2] = [ 'name' => 'off', 'event' => 'ignore' ];
+
+$type = 'alaPethPsePortPowerStatus';
+$config['mibs'][$mib]['states'][$type][1] = [ 'name' => 'powerOn',  'event' => 'ok' ];
+$config['mibs'][$mib]['states'][$type][2] = [ 'name' => 'powerOff', 'event' => 'ignore' ];
+
+// Same as POWER-ETHERNET-MIB, kept here because the port <-> ifIndex association differs
+$type = 'pethMainPseOperStatus';
+$config['mibs'][$mib]['states'][$type][1] = [ 'name' => 'on',     'event' => 'ok' ];
+$config['mibs'][$mib]['states'][$type][2] = [ 'name' => 'off',    'event' => 'ignore' ];
+$config['mibs'][$mib]['states'][$type][3] = [ 'name' => 'faulty', 'event' => 'alert' ];
+
+$type = 'pethPsePortDetectionStatus';
+$config['mibs'][$mib]['states'][$type][1] = [ 'name' => 'disabled',        'event' => 'ignore' ];
+$config['mibs'][$mib]['states'][$type][2] = [ 'name' => 'searching',       'event' => 'ignore' ];
+$config['mibs'][$mib]['states'][$type][3] = [ 'name' => 'deliveringPower', 'event' => 'ok' ];
+// AOS reports fault for any linked non-PoE device (invalid PD signature), not only real faults.
+// Real overloads are caught by the per port PoE Power sensor limit.
+$config['mibs'][$mib]['states'][$type][4] = [ 'name' => 'fault',           'event' => 'ignore' ];
+$config['mibs'][$mib]['states'][$type][5] = [ 'name' => 'test',            'event' => 'ok' ];
+$config['mibs'][$mib]['states'][$type][6] = [ 'name' => 'otherFault',      'event' => 'warning' ];
+
 $mib = 'ALCATEL-ENT1-HEALTH-MIB';
 $config['mibs'][$mib]['enable'] = 1;
 $config['mibs'][$mib]['identity_num'] = '.1.3.6.1.4.1.6486.801.1.2.1.16.1';
@@ -181,6 +242,17 @@
 $config['mibs'][$mib]['mib_dir'] = 'alcatel';
 $config['mibs'][$mib]['descr'] = '';
 
+// Same tables as ALCATEL-ENT1-CHASSIS-MIB, see includes/discovery/sensors/alcatel-ind1-chassis-mib.inc.php
+$config['mibs'][$mib]['states'] = $config['mibs']['ALCATEL-ENT1-CHASSIS-MIB']['states'];
+$config['mibs'][$mib]['states']['chasTempRange'] = $config['mibs']['ALCATEL-ENT1-CHASSIS-MIB']['states']['chasEntTempStatus'];
+
+$mib = 'ALCATEL-IND1-INLINE-POWER-MIB';
+$config['mibs'][$mib]['enable'] = 1;
+$config['mibs'][$mib]['identity_num'] = '.1.3.6.1.4.1.6486.800.1.2.1.27.1';
+$config['mibs'][$mib]['mib_dir'] = 'alcatel';
+$config['mibs'][$mib]['descr'] = 'Alcatel-Lucent AOS 6 PoE (per port power, PSE groups).';
+$config['mibs'][$mib]['states'] = $config['mibs']['ALCATEL-ENT1-INLINE-POWER-MIB']['states'];
+
 $mib = 'ALCATEL-IND1-HEALTH-MIB';
 $config['mibs'][$mib]['enable'] = 1;
 $config['mibs'][$mib]['identity_num'] = '.1.3.6.1.4.1.6486.800.1.2.1.16.1';
--- a/includes/definitions/os/alcatel.inc.php
+++ b/includes/definitions/os/alcatel.inc.php
@@ -58,6 +58,7 @@
 $config['os'][$os]['mibs'][]                = "ALCATEL-IND1-CHASSIS-MIB";
 $config['os'][$os]['mibs'][]                = "ALCATEL-IND1-INTERSWITCH-PROTOCOL-MIB";
 $config['os'][$os]['mibs'][]                = "ALCATEL-IND1-VLAN-STP-MIB";
+$config['os'][$os]['mibs'][]                = "ALCATEL-IND1-INLINE-POWER-MIB";
 $config['os'][$os]['vendortype_mib']        = "ALCATEL-IND1-DEVICES";
 $config['os'][$os]['mib_blacklist'][]       = "CISCO-CDP-MIB";
 
@@ -80,6 +81,7 @@
 $config['os'][$os]['mibs'][]                = "ALCATEL-ENT1-PORT-MIB";
 $config['os'][$os]['mibs'][]                = "ALCATEL-ENT1-INTERSWITCH-PROTOCOL-MIB";
 $config['os'][$os]['mibs'][]                = "ALCATEL-ENT1-VLAN-STP-MIB";
+$config['os'][$os]['mibs'][]                = "ALCATEL-ENT1-INLINE-POWER-MIB";
 $config['os'][$os]['vendortype_mib']        = "ALCATEL-ENT1-DEVICES";
 $config['os'][$os]['mib_blacklist'][]       = "CISCO-CDP-MIB";
 
--- /dev/null
+++ b/includes/discovery/sensors/alcatel-ent1-chassis-mib.inc.php
@@ -0,0 +1,123 @@
+<?php
+/**
+ * Observium
+ *
+ *   This file is part of Observium.
+ *
+ * @package    observium
+ * @subpackage discovery
+ * @copyright  (C) Adam Armstrong
+ *
+ */
+
+// Shared by ALCATEL-ENT1-CHASSIS-MIB (AOS 7/8) and ALCATEL-IND1-CHASSIS-MIB (AOS 6),
+// both MIBs have the same tables under different base Oids.
+
+// ENTITY-MIB::entPhysicalName.275 = STRING: 1/PS-1
+// ENTITY-MIB::entPhysicalClass.275 = INTEGER: powerSupply(6)
+$ala_entities = snmpwalk_cache_oid($device, 'entPhysicalName', [], 'ENTITY-MIB');
+$ala_entities = snmpwalk_cache_oid($device, 'entPhysicalClass', $ala_entities, 'ENTITY-MIB');
+
+////// Modules, power supplies and chassis
+
+// chasEntPhysAdminStatus.275 = INTEGER: powerOn(3)
+// chasEntPhysOperStatus.275 = INTEGER: up(1)
+// chasEntPhysPower.275 = INTEGER: 920
+// chasEntPhysPowerUsed.275 = INTEGER: 0
+$oids = snmpwalk_cache_oid($device, 'chasEntPhysOperStatus', [], $mib);
+$oids = snmpwalk_cache_oid($device, 'chasEntPhysAdminStatus', $oids, $mib);
+if (snmp_translate('chasEntPhysPowerUsed', $mib)) {
+    // Only in AOS 7/8
+    $oids = snmpwalk_cache_oid($device, 'chasEntPhysPower', $oids, $mib);
+    $oids = snmpwalk_cache_oid($device, 'chasEntPhysPowerUsed', $oids, $mib);
+}
+
+$oid_num = snmp_translate('chasEntPhysOperStatus', $mib);
+foreach ($oids as $index => $entry) {
+    $class = $ala_entities[$index]['entPhysicalClass'] ?? '';
+    $name  = $ala_entities[$index]['entPhysicalName'] ?? '';
+
+    // Skip transceivers, these are covered by DDM sensors
+    if (!in_array($class, [ 'chassis', 'module', 'powerSupply', 'fan', 'stack' ], TRUE) ||
+        str_icontains_array($name, 'TRANSCEIVER')) {
+        continue;
+    }
+    if ($entry['chasEntPhysAdminStatus'] === 'powerOff') {
+        continue;
+    }
+
+    $descr   = safe_empty($name) ? nicecase($class) . " $index" : $name;
+    $options = [ 'entPhysicalIndex' => $index, 'entPhysicalClass' => $class ];
+
+    discover_status_ng($device, $mib, 'chasEntPhysOperStatus', "$oid_num.$index", $index, 'chasEntPhysOperStatus', $descr, $entry['chasEntPhysOperStatus'], $options);
+
+    // PSU output power, not reported by all platforms (OS6860E reports 0)
+    if ($class === 'powerSupply' && $entry['chasEntPhysPowerUsed'] > 0) {
+        $options_power = $options;
+        if ($entry['chasEntPhysPower'] > 0) {
+            // chasEntPhysPower is the PSU capacity in Watts
+            $options_power['limit_high']      = $entry['chasEntPhysPower'];
+            $options_power['limit_high_warn'] = $entry['chasEntPhysPower'] * 0.9;
+        }
+        $oid_power = snmp_translate('chasEntPhysPowerUsed', $mib) . ".$index";
+        discover_sensor_ng($device, 'power', $mib, 'chasEntPhysPowerUsed', $oid_power, $index, $descr, 1, $entry['chasEntPhysPowerUsed'], $options_power);
+    }
+}
+
+////// Fans
+
+// alaChasEntPhysFanStatus.451.1 = INTEGER: running(2)
+// alaChasEntPhysFanAirflow.451.1 = INTEGER: notApplicable(2)
+// alaChasEntPhysFanSpeed.451.1 = Gauge32: 7800 rpm
+$oids = snmpwalk_cache_oid($device, 'alaChasEntPhysFanStatus', [], $mib);
+if (snmp_translate('alaChasEntPhysFanSpeed', $mib)) {
+    $oids = snmpwalk_cache_oid($device, 'alaChasEntPhysFanSpeed', $oids, $mib);
+}
+
+$oid_num   = snmp_translate('alaChasEntPhysFanStatus', $mib);
+$oid_speed = snmp_translate('alaChasEntPhysFanSpeed', $mib);
+foreach ($oids as $index => $entry) {
+    [ $tray, $fan ] = explode('.', $index);
+
+    // Fan tray entity (451 = 1/FANTRAY-1), not exposed in ENTITY-MIB by all platforms
+    if (!safe_empty($ala_entities[$tray]['entPhysicalName'])) {
+        $descr   = $ala_entities[$tray]['entPhysicalName'] . " Fan $fan";
+        $options = [ 'entPhysicalIndex' => $tray, 'entPhysicalClass' => 'fan' ];
+    } else {
+        $descr   = ($tray > 450 ? 'Chassis ' . ($tray - 450) : "Fan Tray $tray") . " Fan $fan";
+        $options = [ 'entPhysicalClass' => 'fan' ];
+    }
+
+    discover_status_ng($device, $mib, 'alaChasEntPhysFanStatus', "$oid_num.$index", $index, 'alaChasEntPhysFanStatus', $descr, $entry['alaChasEntPhysFanStatus'], $options);
+
+    // OS6860E reports 0 rpm for all fans, only status available
+    if ($entry['alaChasEntPhysFanSpeed'] > 0) {
+        unset($options['entPhysicalClass']);
+        discover_sensor_ng($device, 'fanspeed', $mib, 'alaChasEntPhysFanSpeed', "$oid_speed.$index", $index, $descr, 1, $entry['alaChasEntPhysFanSpeed'], $options);
+    }
+}
+
+////// Chassis temperature status
+
+if (snmp_translate('chasEntTempStatus', $mib)) {
+    // AOS 7/8, indexed by CMM entPhysicalIndex
+    // chasEntTempStatus.65 = INTEGER: underThreshold(3)
+    $oid_name = 'chasEntTempStatus';
+} else {
+    // AOS 6, indexed by chassis entPhysicalIndex
+    // chasTempRange.569 = INTEGER: underThreshold(3)
+    $oid_name = 'chasTempRange';
+}
+$oids    = snmpwalk_cache_oid($device, $oid_name, [], $mib);
+$oid_num = snmp_translate($oid_name, $mib);
+foreach ($oids as $index => $entry) {
+    $name    = $ala_entities[$index]['entPhysicalName'] ?? '';
+    $descr   = 'Chassis ' . (safe_empty($name) || str_istarts($name, 'Chassis') ? '' : "$name ") . 'Temperature';
+    $options = [ 'entPhysicalIndex' => $index, 'entPhysicalClass' => 'chassis' ];
+
+    discover_status_ng($device, $mib, $oid_name, "$oid_num.$index", $index, $oid_name, $descr, $entry[$oid_name], $options);
+}
+
+unset($ala_entities, $oids, $oid_num, $oid_speed, $oid_name, $tray, $fan, $name, $class, $descr, $options, $options_power, $oid_power);
+
+// EOF
--- /dev/null
+++ b/includes/discovery/sensors/alcatel-ent1-inline-power-mib.inc.php
@@ -0,0 +1,132 @@
+<?php
+/**
+ * Observium
+ *
+ *   This file is part of Observium.
+ *
+ * @package    observium
+ * @subpackage discovery
+ * @copyright  (C) Adam Armstrong
+ *
+ */
+
+// Shared by ALCATEL-ENT1-INLINE-POWER-MIB (AOS 7/8) and ALCATEL-IND1-INLINE-POWER-MIB (AOS 6).
+//
+// PoE group index is (chassis - 1) * 1000 + slot, so in a virtual chassis:
+//   alaPethPsePortPowerActual.1.25    -> 1/1/25 (ifIndex 1025)
+//   alaPethPsePortPowerActual.1001.25 -> 2/1/25 (ifIndex 101025)
+// AOS 6 (chassis always 1): alaPethPsePortPowerActual.2.5 -> 2/5 (ifIndex 2005)
+// Generic POWER-ETHERNET-MIB discovery can't associate these ports, so it is not used for Alcatel.
+
+if (!function_exists('alcatel_peth_group')) {
+    function alcatel_peth_group($group) {
+        $chassis = intdiv((int)$group, 1000) + 1;
+        $slot    = (int)$group % 1000;
+
+        return [ $chassis, $slot, ($chassis - 1) * 100000 + $slot * 1000 ];
+    }
+}
+
+$is_aos6 = str_starts_with($mib, 'ALCATEL-IND1');
+
+////// PoE groups (PSE)
+
+// alaPethMainPseAdminStatus.1001 = INTEGER: on(1)
+// alaPethMainPseMaxPower.1001 = INTEGER: 1560 Watts
+// AOS 7/8 only:
+// pethMainPsePower.1001 = Gauge32: 1560 Watts
+// pethMainPseOperStatus.1001 = INTEGER: on(1)
+// pethMainPseConsumptionPower.1001 = Gauge32: 36 Watts
+$oids = snmpwalk_cache_oid($device, 'alaPethMainPseAdminStatus', [], $mib);
+$oids = snmpwalk_cache_oid($device, 'alaPethMainPseMaxPower', $oids, $mib);
+if (!$is_aos6) {
+    $oids = snmpwalk_cache_oid($device, 'pethMainPseTable', $oids, 'POWER-ETHERNET-MIB');
+}
+
+foreach ($oids as $group => $entry) {
+    [ $chassis, $slot ] = alcatel_peth_group($group);
+    if ($is_aos6) {
+        $descr = "PoE Slot $slot";
+    } else {
+        $descr = "PoE Chassis $chassis" . ($slot > 1 ? " Slot $slot" : '');
+    }
+
+    if (isset($entry['pethMainPseOperStatus'])) {
+        discover_status_ng($device, $mib, 'pethMainPseOperStatus', ".1.3.6.1.2.1.105.1.3.1.1.3.$group", $group, 'pethMainPseOperStatus', $descr, $entry['pethMainPseOperStatus'], [ 'entPhysicalClass' => 'power' ]);
+    } else {
+        $oid_num = snmp_translate('alaPethMainPseAdminStatus', $mib);
+        discover_status_ng($device, $mib, 'alaPethMainPseAdminStatus', "$oid_num.$group", $group, 'alaPethMainPseAdminStatus', $descr, $entry['alaPethMainPseAdminStatus'], [ 'entPhysicalClass' => 'power' ]);
+    }
+
+    if (is_numeric($entry['pethMainPseConsumptionPower'])) {
+        $max     = $entry['pethMainPsePower'] > 0 ? $entry['pethMainPsePower'] : $entry['alaPethMainPseMaxPower'];
+        $options = [];
+        if ($max > 0) {
+            $options['limit_high']      = $max;
+            $options['limit_high_warn'] = $max * 0.9;
+        }
+        discover_sensor_ng($device, 'power', $mib, 'pethMainPseConsumptionPower', ".1.3.6.1.2.1.105.1.3.1.1.4.$group", $group, $descr, 1, $entry['pethMainPseConsumptionPower'], $options);
+    }
+}
+
+////// PoE ports
+
+// alaPethPsePortPowerMaximum.1.1 = INTEGER: 60000
+// alaPethPsePortPowerActual.1.1 = INTEGER: 2800
+// alaPethPsePortPowerStatus.1.1 = INTEGER: powerOn(1)
+// alaPethPsePortPowerClass.1.1 = INTEGER: class0(0)
+// AOS 7/8 only:
+// pethPsePortAdminEnable.1.1 = INTEGER: true(1)
+// pethPsePortDetectionStatus.1.1 = INTEGER: deliveringPower(3)
+$oids = snmpwalk_cache_oid($device, 'alaPethPsePortPowerActual', [], $mib);
+if (!snmp_status()) {
+    return;
+}
+$oids = snmpwalk_cache_oid($device, 'alaPethPsePortPowerMaximum', $oids, $mib);
+$oids = snmpwalk_cache_oid($device, 'alaPethPsePortPowerStatus', $oids, $mib);
+if (!$is_aos6) {
+    $oids = snmpwalk_cache_oid($device, 'pethPsePortAdminEnable', $oids, 'POWER-ETHERNET-MIB');
+    $oids = snmpwalk_cache_oid($device, 'pethPsePortDetectionStatus', $oids, 'POWER-ETHERNET-MIB');
+}
+
+$oid_power  = snmp_translate('alaPethPsePortPowerActual', $mib);
+$oid_status = snmp_translate('alaPethPsePortPowerStatus', $mib);
+foreach ($oids as $index => $entry) {
+    if ($entry['pethPsePortAdminEnable'] === 'false') {
+        // PoE disabled on port
+        continue;
+    }
+
+    [ $group, $port ] = explode('.', $index);
+    [ $chassis, $slot, $if_base ] = alcatel_peth_group($group);
+
+    $if_name = $is_aos6 ? "$slot/$port" : "$chassis/$slot/$port";
+    $def = [ 'measured_match' => [
+        [ 'entity_type' => 'port', 'field' => 'ifIndex', 'match' => (string)($if_base + $port) ],
+        [ 'entity_type' => 'port', 'field' => 'ifName',  'match' => $if_name ],
+    ] ];
+    if (!($options = entity_measured_match_definition($device, $def, $entry))) {
+        $options = [ 'port_label' => $if_name ];
+    }
+
+    // Power, mW
+    $descr = $options['port_label'] . ' PoE Power';
+    $options_power = $options;
+    if ($entry['alaPethPsePortPowerMaximum'] > 0) {
+        $options_power['limit_high']      = $entry['alaPethPsePortPowerMaximum'] * 0.001;
+        $options_power['limit_high_warn'] = $entry['alaPethPsePortPowerMaximum'] * 0.001 * 0.9;
+    }
+    discover_sensor_ng($device, 'power', $mib, 'alaPethPsePortPowerActual', "$oid_power.$index", $index, $descr, 0.001, $entry['alaPethPsePortPowerActual'], $options_power);
+
+    // Status
+    $descr = $options['port_label'] . ' PoE Status';
+    if (isset($entry['pethPsePortDetectionStatus'])) {
+        discover_status_ng($device, $mib, 'pethPsePortDetectionStatus', ".1.3.6.1.2.1.105.1.1.1.6.$index", $index, 'pethPsePortDetectionStatus', $descr, $entry['pethPsePortDetectionStatus'], $options);
+    } else {
+        discover_status_ng($device, $mib, 'alaPethPsePortPowerStatus', "$oid_status.$index", $index, 'alaPethPsePortPowerStatus', $descr, $entry['alaPethPsePortPowerStatus'], $options);
+    }
+}
+
+unset($oids, $entry, $is_aos6, $group, $port, $chassis, $slot, $if_base, $if_name, $def, $descr, $options, $options_power, $oid_num, $oid_power, $oid_status, $max);
+
+// EOF
--- /dev/null
+++ b/includes/discovery/sensors/alcatel-ind1-chassis-mib.inc.php
@@ -0,0 +1,16 @@
+<?php
+/**
+ * Observium
+ *
+ *   This file is part of Observium.
+ *
+ * @package    observium
+ * @subpackage discovery
+ * @copyright  (C) Adam Armstrong
+ *
+ */
+
+// ALCATEL-IND1-CHASSIS-MIB (AOS 6) has the same tables as ALCATEL-ENT1-CHASSIS-MIB
+include __DIR__ . '/alcatel-ent1-chassis-mib.inc.php';
+
+// EOF
--- /dev/null
+++ b/includes/discovery/sensors/alcatel-ind1-inline-power-mib.inc.php
@@ -0,0 +1,16 @@
+<?php
+/**
+ * Observium
+ *
+ *   This file is part of Observium.
+ *
+ * @package    observium
+ * @subpackage discovery
+ * @copyright  (C) Adam Armstrong
+ *
+ */
+
+// ALCATEL-IND1-INLINE-POWER-MIB (AOS 6) has the same tables as ALCATEL-ENT1-INLINE-POWER-MIB
+include __DIR__ . '/alcatel-ent1-inline-power-mib.inc.php';
+
+// EOF
