Uploaded image for project: 'Observium'
  1. Observium
  2. OBS-2823

Improve breakout transceivers support

Details

    Description

      Is there somehow possible to improve the support of matching the health values to the breakout’ed ports?

      We have some 1x40G (-> 4x10G breakout) optics in use and would like to get the dBm, ampere etc values to port specific port matched. In this example to TenGigE0/0/0/34/1.

      Attached I have a full debug output for a device which contains this sort of optics.

      Example Port: TenGigE0/0/0/34/1 which is a daughter port of FortyGigE0/0/0/34

      Attachments

        Activity

          [OBS-2823] Improve breakout transceivers support
          landy Mike Stupalov made changes -
          Status Original: Resolved [ 5 ] New: Closed [ 6 ]
          landy Mike Stupalov added a comment -

          try with r9777.
          Probably, now correct?

          landy Mike Stupalov added a comment - try with r9777. Probably, now correct?
          dklimek Denis Klimek added a comment -

          100G transceivers are now linked very well to the sensors, but the 40G are still not linked with their sensors.
          Also the 10G "breakout'ed" transceivers has no linked sensors.

          I sent you a discovery debug for 40G. The same device has also 4x10G breakout'ed from a 40G transceiver,

           

          dklimek Denis Klimek added a comment - 100G transceivers are now linked very well to the sensors, but the 40G are still not linked with their sensors. Also the 10G "breakout'ed" transceivers has no linked sensors. I sent you a discovery debug for 40G. The same device has also 4x10G breakout'ed from a 40G transceiver,  
          landy Mike Stupalov made changes -
          Resolution New: Fixed [ 1 ]
          Status Original: In Progress [ 3 ] New: Resolved [ 5 ]
          landy Mike Stupalov added a comment -

          Sensors should be assiate now with ports.
          Fixed in r9775.

          landy Mike Stupalov added a comment - Sensors should be assiate now with ports. Fixed in r9775.
          landy Mike Stupalov made changes -
          Status Original: Pending Response [ 10000 ] New: In Progress [ 3 ]
          landy Mike Stupalov made changes -
          Status Original: Open [ 1 ] New: Pending Response [ 10000 ]
          landy Mike Stupalov added a comment -

          This is how cisco report sensors by CISCO-ENTITY-SENSOR-MIB, there not any information about liks between Ten <-> Forty.
          Probably we can try make another way for link such ports...

          Can you provide temporary access to this (or similar) device with breakout’ed ports? (write me to mike@observium.org)

          landy Mike Stupalov added a comment - This is how cisco report sensors by CISCO-ENTITY-SENSOR-MIB, there not any information about liks between Ten <-> Forty. Probably we can try make another way for link such ports... Can you provide temporary access to this (or similar) device with breakout’ed ports? (write me to mike@observium.org)
          dklimek Denis Klimek created issue -

          People

            landy Mike Stupalov
            dklimek Denis Klimek
            Votes:
            0 Vote for this issue
            Watchers:
            2 Start watching this issue

            Dates

              Created:
              Updated:
              Resolved: