Major Description
When I add the EELTEX OLT and it runs discovery, it finds them onts, but Ignored = yes. What should be done so that they are not ignored ?
ifType is empty , when I go to snmpwalk it finds them in IF-MIB ...
-
-
-
- Module Start: ports #####
-
-
o Caching OIDs ifDescr ifAlias ifName ifType ifOperStatus
o Caching DB 21 ports
o Discovering ports .....................XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
------------------------------------------------------------------------------
| ifIndex | ifDescr | ifName | ifAlias | ifType | Oper Status | Ignored |
------------------------------------------------------------------------------
| 1 | PON channel 1 | PON channel 1 | ... | gpon | up | no |
| 2 | PON channel 2 | PON channel 2 | ... | gpon | up | no |
| 3 | PON channel 3 | PON channel 3 | ... | gpon | up | no |
| 4 | PON channel 4 | PON channel 4 | ... | gpon | up | no |
| 5 | PON channel 5 | PON channel 5 | ... | gpon | up | no |
| 6 | PON channel 6 | PON channel 6 | ... | gpon | up | no |
| 7 | PON channel 7 | PON channel 7 | ... | gpon | up | no |
| 8 | PON channel 8 | PON channel 8 | ... | gpon | up | no |
| 9 | Uplink 0 | Uplink 0 | ... | ethernetCsmacd | down | no |
| 10 | Uplink 1 | Uplink 1 | ... | ethernetCsmacd | down | no |
| 11 | Uplink 2 | Uplink 2 | ... | ethernetCsmacd | down | no |
| 12 | Uplink 3 | Uplink 3 | ... | ethernetCsmacd | down | no |
| 13 | Uplink 4 | Uplink 4 | ... | ethernetCsmacd | down | no |
| 14 | Uplink 5 | Uplink 5 | ... | ethernetCsmacd | down | no |
| 15 | Uplink 6 | Uplink 6 | ... | ethernetCsmacd | down | no |
| 16 | Uplink 7 | Uplink 7 | ... | ethernetCsmacd | down | no |
| 17 | Uplink 8 | Uplink 8 | ... | fibreChannel | up | no |
| 18 | Uplink 9 | Uplink 9 | ... | ethernetCsmacd | down | no |
| 19 | mgmt-pon-port 0 | mgmt-pon-port 0 | ... | ethernetCsmacd | up | no |
| 20 | mgmt-pon-port 1 | mgmt-pon-port 1 | ... | ethernetCsmacd | up | no |
| 31 | CPU | CPU | ... | ethernetCsmacd | up | no |
| 1001 | ... | ont 0/0 | ... | yes | ||
| 1129 | ... | ont 1/0 | ... | yes | ||
| 1130 | ... | ont 1/1 | ... | yes | ||
| 1131 | ... | ont 1/2 | ... | yes | ||
| 1132 | ... | ont 1/3 | ... | yes | ||
| 1133 | ... | ont 1/4 | ... | yes | ||
| 1134 | ... | ont 1/5 | ... | yes | ||
| 1135 | ... | ont 1/6 | ... | yes | ||
| 1136 | ... | ont 1/7 | ... | yes | ||
| 1137 | ... | ont 1/8 | ... | yes | ||
| 1138 | ... | ont 1/9 | ... | yes | ||
| 1139 | ... | ont 1/10 | ... | yes | ||
| 1140 | ... | ont 1/11 | ... | yes | ||
| 1141 | ... | ont 1/12 | ... | yes | ||
| 1142 | ... | ont 1/13 | ... | yes | ||
| 1143 | ... | ont 1/14 | ... | yes | ||
| 1144 | ... | ont 1/15 | ... | yes | ||
| 1145 | ... | ont 1/16 | ... | yes | ||
| 1146 | ... | ont 1/17 | ... | yes | ||
| 1147 | ... | ont 1/18 | ... | yes | ||
| 1148 | ... | ont 1/19 | ... | yes | ||
| 1149 | ... | ont 1/20 | ... | yes |
Attachments
Activity
Probably device have troubles with snmp bulk walk (in discovery port Oids randomly return partial data).
Try set max-rep to 0 and make discovery again.
- Device -> Properties -> SNMP -> max-rep 0
I added them, for MIBs I see that they are all official from ELTEX, if some are missing I will try to add them.
I added them, for MIBs I see that they are all official from ELTEX, if some are missing I will try to add them.
I see empty ifType and ifOperStatus. Such ports always ignored.
Attach discovery debug for device as Bot requested.
General questions and device support can be discussed in our Discord channel, click here to join.
Please make and attach additional information about the device:
- full snmp dump from device:
snmpwalk -v2c -c <community> -t 3 -Cc --hexOutputLength=0 -Ih -ObentxU <hostname> .1 > myagent.snmpwalksnmpwalk -v2c -c <community> -t 3 -Cc --hexOutputLength=0 -Ih -ObentxU <hostname> .1.3.6.1.4.1 >> myagent.snmpwalkIf device not support SNMP version 2c, replace -v2c with -v1.
- If you have problems with discovery or poller processes, please do and attach these debugs:
./discovery.php -d -h <device>./poller.php -d -h <device>
- additionally attach device and/or vendor specific MIB files
This comment is added automatically.
This is oids from your debug:
ifName.1 = PON channel 1ifName.2 = PON channel 2ifName.3 = PON channel 3ifName.4 = PON channel 4ifName.5 = Uplink 0ifName.6 = Uplink 1ifName.7 = Uplink 2ifName.8 = Uplink 3ifName.9 = Uplink 4ifName.10 = Uplink 5ifName.1002 = ont 0/1ifName.1004 = ont 0/3ifName.1005 = ont 0/4ifName.1008 = ont 0/7ifName.1009 = ont 0/8ifName.1010 = ont 0/9ifName.1011 = ont 0/10ifName.1012 = ont 0/11ifName.1013 = ont 0/12ifName.1017 = ont 0/16ifName.1018 = ont 0/17ifName.1019 = ont 0/18ifName.1020 = ont 0/19ifName.1021 = ont 0/20ifName.1022 = ont 0/21ifName.1041 = ont 0/40ifName.1101 = ont 0/100ifName.1129 = ont 1/0ifName.1130 = ont 1/1ifName.1131 = ont 1/2ifName.1132 = ont 1/3ifName.1133 = ont 1/4ifName.1134 = ont 1/5ifName.1135 = ont 1/6ifName.1136 = ont 1/7ifName.1137 = ont 1/8ifName.1138 = ont 1/9ifName.1139 = ont 1/10ifName.1257 = ont 2/0ifName.1258 = ont 2/1ifName.1259 = ont 2/2ifName.1260 = ont 2/3ifName.1261 = ont 2/4ifName.1262 = ont 2/5ifName.1263 = ont 2/6ifName.1264 = ont 2/7ifName.1265 = ont 2/8ifName.1266 = ont 2/9ifName.1267 = ont 2/10ifName.1268 = ont 2/11ifName.1269 = ont 2/12ifType.1 = gponifType.2 = gponifType.3 = gponifType.4 = gponifType.5 = ethernetCsmacdifType.6 = ethernetCsmacdifType.7 = ethernetCsmacdifType.8 = ethernetCsmacdifType.9 = ethernetCsmacdifType.10 = fibreChannelifOperStatus.1 = upifOperStatus.2 = upifOperStatus.3 = upifOperStatus.4 = upifOperStatus.5 = downifOperStatus.6 = downifOperStatus.7 = downifOperStatus.8 = upifOperStatus.9 = downifOperStatus.10 = upDevice return full ifName/ifDescr and only first 10 interfaces for all other Oids.
This is firmware/hardware issue, not possible to fix on observium side.
You need to ask Vendor about this.