Details

    • Add New Device / OS
    • Resolution: Fixed
    • Minor
    • None
    • None
    • Default
    • None

    Description

      Hello,

      Is it possible to add Inveo Hero-WS and Inveo Nano Temperature devices to Observium?

      Attachments

        1. InveoHero.png
          InveoHero.png
          25 kB
        2. InveoHero-OIDs.png
          InveoHero-OIDs.png
          101 kB
        3. Inveo-logo.jpg
          Inveo-logo.jpg
          9 kB
        4. InveoNano.png
          InveoNano.png
          25 kB

        Issue Links

          Activity

            [OBS-4413] New devices - Inveo

            Yes, but only for Inveo Nano. For Inveo Hero Web Sensor sensors have not been added (or simply data and graphs are not displayed) . 

            In a comment earlier you wrote back that it failed to pull the needed data from SNMP walk. So I performed the SNMP walk again for this device. I would appreciate if you could review the "myagent.snmpwalk_InveoHero" file. If again no useful data can be extracted from this SNMP walk, I would like to contact the manufacturer of the device regarding this issue.

            helpdeskclip Helpdesk added a comment - Yes, but only for Inveo Nano. For Inveo Hero Web Sensor sensors have not been added (or simply data and graphs are not displayed) .  In a comment earlier you wrote back that it failed to pull the needed data from SNMP walk. So I performed the SNMP walk again for this device. I would appreciate if you could review the "myagent.snmpwalk_InveoHero" file. If again no useful data can be extracted from this SNMP walk, I would like to contact the manufacturer of the device regarding this issue.

            What you mean?
            Sensors discovery already added in r12548.

            Pro edition, rolling.

            landy Mike Stupalov added a comment - What you mean? Sensors discovery already added in r12548. Pro edition, rolling.

            Hello,

            Is it possible to extract any data from the file "myagent.snmpwalk_InveoHero" and adding along with the graphs of this device (Inveo Hero Web Sensor) to Observium?

            If this is not possible, please provide the reason, as in this case I intend to contact the manufacturer of the device to solve this problem.

            helpdeskclip Helpdesk added a comment - Hello, Is it possible to extract any data from the file "myagent.snmpwalk_InveoHero" and adding along with the graphs of this device (Inveo Hero Web Sensor) to Observium? If this is not possible, please provide the reason, as in this case I intend to contact the manufacturer of the device to solve this problem.

            Thanks Mike! Works great now!

            djpidde Peter Johansson added a comment - Thanks Mike! Works great now!

            Ohh, mistake, fixed in r12548.

            landy Mike Stupalov added a comment - Ohh, mistake, fixed in r12548.

            I added a nano to my observium installation and it is recognised but it wont pick up temperature and doing a graph of it.. 

            Could it have something to do with this cutout output from debug in discovery?

            CMD EXITCODE[0]
            CMD RUNTIME[0.0614s]
            STDOUT[
            ch1-tempint10.0 = 202
            ch1-tempint10 = No more variables left in this MIB View (It is past the end of the MIB tree)
            ]
            SNMP STATUS[TRUE]
            Store in cache Table OID: Nano::tempint10
            Excluded by current value () is not numeric.

            djpidde Peter Johansson added a comment - I added a nano to my observium installation and it is recognised but it wont pick up temperature and doing a graph of it..  Could it have something to do with this cutout output from debug in discovery? CMD EXITCODE [0] CMD RUNTIME [0.0614s] STDOUT[ ch1-tempint10.0 = 202 ch1-tempint10 = No more variables left in this MIB View (It is past the end of the MIB tree) ] SNMP STATUS [TRUE] Store in cache Table OID: Nano::tempint10 Excluded by current value () is not numeric. ] 

            No real data in attached snmp walk.
            Added sensors discovery as is in r12540.

            landy Mike Stupalov added a comment - No real data in attached snmp walk. Added sensors discovery as is in r12540.

            In the attachments I also sent a file with snmpwalk for Inveo Hero.

             

            helpdeskclip Helpdesk added a comment - In the attachments I also sent a file with snmpwalk for Inveo Hero.  

            For Nano support added in r12533.

            landy Mike Stupalov added a comment - For Nano support added in r12533.

            It's seems as for Hero-WS need separate snmpdump.

            landy Mike Stupalov added a comment - It's seems as for Hero-WS need separate snmpdump.

            General questions and device support can be discussed in our Discord channel, click here to join.


            Please make and attach additional information about the device:

            • full snmp dump from device:

              snmpwalk -v2c -c <community> -t 3 -Cc --hexOutputLength=0 -ObentxU <hostname> .1 > myagent.snmpwalk
              snmpwalk -v2c -c <community> -t 3 -Cc --hexOutputLength=0 -ObentxU <hostname> .1.3.6.1.4.1 >> myagent.snmpwalk

              If device not support SNMP version 2c, replace -v2c with -v1.

            • If you have problems with discovery or poller processes, please do and attach these debugs:

              ./discovery.php -d -h <device>
              ./poller.php -d -h <device>

            • additionally attach device and/or vendor specific MIB files

            This comment is added automatically.

            bot Observium Bot added a comment - General questions and device support can be discussed in our Discord channel, click here to join . Please make and attach additional information about the device: full snmp dump from device: snmpwalk -v2c -c <community> -t 3 -Cc --hexOutputLength=0 -ObentxU <hostname> .1 > myagent.snmpwalk snmpwalk -v2c -c <community> -t 3 -Cc --hexOutputLength=0 -ObentxU <hostname> .1.3.6.1.4.1 >> myagent.snmpwalk If device not support SNMP version 2c, replace -v2c with -v1. If you have problems with discovery or poller processes, please do and attach these debugs: ./discovery.php -d -h <device> ./poller.php -d -h <device> additionally attach device and/or vendor specific MIB files This comment is added automatically.

            People

              landy Mike Stupalov
              helpdeskclip Helpdesk
              Votes:
              0 Vote for this issue
              Watchers:
              4 Start watching this issue

              Dates

                Created:
                Updated:
                Resolved: