-- Breeze control MIB. -- -- Author Date Comment -- ================================================================== -- D Erez 3/27/10 Initial release -- D Erez 11/02/21 nms trap forwarding information -- D Erez 24/01/22 Update HE rates -- D Erez 21/11/23 Update System information -- D Erez 12/04/24 Add capacity for monitoring and more information in peer table -- D Erez 23/11/25 Add available throughput TELRAD-BREEZEAIR-MIB DEFINITIONS ::= BEGIN IMPORTS InetAddress, InetAddressType, InetPortNumber FROM INET-ADDRESS-MIB MacAddress, DisplayString, DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC enterprises, MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter32, Counter64, Integer32, Unsigned32 FROM SNMPv2-SMI OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF; telradBREEZEAIR MODULE-IDENTITY LAST-UPDATED "202511231145Z" -- Nov 23, 2025 11:45:00 AM ORGANIZATION "Telrad" CONTACT-INFO "Editors: Danny Erez Phone: +972-4-902-7000 Email: www.telrad.com" DESCRIPTION "This file defines the private Telrad BreezeAX definitions." REVISION "202511231145Z" -- Nov 23, 2025 11:45:00 AM DESCRIPTION "Add availability information for PTP" -- 1.3.6.1.4.1.1301 ::= { enterprises 1301 } -- Community String "Breeze" -- Defined Types ActivationState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a boolean value." SYNTAX INTEGER { on(1), off(2) } Bands ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Frequency bands in MHz." SYNTAX INTEGER { b4950TO5150MHz(0), b5250TO5350MHz(1), b5470TO5725MHz(2), b5725TO5850MHz(3), b5150TO5250MHz(4), b5350TO5470MHz(5), b5850TO6000MHz(6), b4450TO4750MHz(7), b4800TO4950MHz(8), b4940TO4990MHz(9), b3300TO3350MHz(100), b3350TO3400MHz(101), b3400TO3450MHz(102), b3450TO3500MHz(103), b3500TO3550MHz(104), b3550TO3600MHz(105), b3600TO3650MHz(106), b3650TO3700MHz(107), b3700TO3750MHz(108), b3750TO3800MHz(109), b2412TO2484MHz(120), b2580TO2620MHz(121), b2300TO2350MHz(122), b2350TO2400MHz(123), b2500TO2550MHz(124), b2550TO2600MHz(125), b2600TO2650MHz(126), b2650TO2700MHz(127), b6000TO6200MHz(140), b6200TO6400MHz(141), b6400TO6500MHz(142), b6500TO6620MHz(143)} ChannelWidths ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Channel widths in MHz." SYNTAX INTEGER { w5MHz(1), w10MHz(2), w20MHz(3), w40MHz(4), w3_5MHz(5), w7MHz(6), w14MHz(7), w28MHz(8), w56MHz(9), w80MHz(10), w160MHz(11)} ModulationRates ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Modulation type." SYNTAX INTEGER { rBPSK1Over2(1), rQPSK1Over2(2), rQPSK3Over4(3), r16QAM1Over2(4), r16QAM3Over4(5), r64QAM2Over3(6), r64QAM3Over4(7), r64QAM5Over6(8), r256QAM3Over4(9), r256QAM5Over6(10), r1024QAM3Over4(11), r1024QAM5Over6(12), automatic(13) } RegulatoryBody ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Regulatory enforcement." SYNTAX INTEGER { fcc(1), etsi(2), none(3) } UnitType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Master or Slave." SYNTAX INTEGER { mu(1), su(2) } IpFilterType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IP filters." SYNTAX INTEGER { disabled(1), iponly(2), addronly(3), pppoeonly(4) } NetworkMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "SU Network Mode." SYNTAX INTEGER { netBridge(1), netFilterBroadcasts(2), netVlan(3), netVlanFilter(4) } DiversityMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Diversity Mode." SYNTAX INTEGER { diversityOn(1), diversityOff(2), diversityAuto(3)} SystemMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "MU System Mode." SYNTAX INTEGER { sysModePTP(1), sysModePTPQoS(2), sysModePTMP(3), sysModeTDM(4), sysModeACCESS(5)} AlarmSeverity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Alarm severity levels." SYNTAX INTEGER { critical(1), warning(2), notification(3), report(4), normal(5) } AlarmModule ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Module generating the alarm." SYNTAX INTEGER { ethrx(1), ethtx(2), mac(3), mgmt(4), phyrx(5), phytx(6) } AlarmState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Alarm life cycle states." SYNTAX INTEGER { open(1), process(2), closed(3) } SiduClockMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "S-IDU clock mode." SYNTAX INTEGER { loopback-Adaptive(1), adaptive-Loopback(2), internal-Adaptive(3), adaptive-Internal(4)} ServiceTypes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Service type." SYNTAX INTEGER { BE(0), CIR(1), MIR(2) } product OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.1 ::= { telradBREEZEAIR 1 } -- Product Information name OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "Product name (BreezeAX)." -- 1.3.6.1.4.1.1301.1.1 ::= { product 1 } version OBJECT-TYPE SYNTAX DisplayString (SIZE (3..9)) UNITS "." MAX-ACCESS read-only STATUS current DESCRIPTION "Product Version." -- 1.3.6.1.4.1.1301.1.2 ::= { product 2 } date OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Product version date. See DateAndTime textual convention in textual Conventions for SMIv2" -- 1.3.6.1.4.1.1301.1.3 ::= { product 3 } activeFirmware OBJECT-TYPE SYNTAX DisplayString (SIZE (9)) MAX-ACCESS read-only STATUS current DESCRIPTION "Active firmware version (format XXXX.XXXX)." -- 1.3.6.1.4.1.1301.1.5 ::= { product 5 } inactiveFirmware OBJECT-TYPE SYNTAX DisplayString (SIZE (9)) MAX-ACCESS read-only STATUS current DESCRIPTION "Inactive firmware version (format XXXX.XXXX)." -- 1.3.6.1.4.1.1301.1.6 ::= { product 6 } pcb OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "HW board number." -- 1.3.6.1.4.1.1301.1.7 ::= { product 7 } activeLicense OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Textual description of radio license." -- 1.3.6.1.4.1.1301.1.8 ::= { product 8 } general OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.2 ::= { telradBREEZEAIR 2 } -- General Unit ------------------------------------ alias OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Unit descriptive name." -- 1.3.6.1.4.1.1301.2.1 ::= { general 1 } muId OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "MU ID - used by the SU to identify its master." -- 1.3.6.1.4.1.1301.2.2 ::= { general 2 } macAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Unit MAC address." -- 1.3.6.1.4.1.1301.2.3 ::= { general 3 } ipAddressType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The INET address type of the device. Support IPv4 only." -- 1.3.6.1.4.1.1301.2.4 ::= { general 4 } ipAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Unit management IP. Support IPv4 inetaddresstype only. Requires reboot to take effect." -- 1.3.6.1.4.1.1301.2.5 ::= { general 5 } mgmtVlanId OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "Management VLAN tag." -- 1.3.6.1.4.1.1301.2.6 ::= { general 6 } mgmtPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (5..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Management password." -- 1.3.6.1.4.1.1301.2.7 ::= { general 7 } syncon OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable Time synchronization (relevant for MU only)." -- 1.3.6.1.4.1.1301.2.8 ::= { general 8 } syncmaster OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-write STATUS current DESCRIPTION "Time synchronization master/slave mode (relevant for MU only)." -- 1.3.6.1.4.1.1301.2.9 ::= { general 9 } synccnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time synchronization sync pulses counter." -- 1.3.6.1.4.1.1301.2.10 ::= { general 10 } regulatoryDomain OBJECT-TYPE SYNTAX RegulatoryBody MAX-ACCESS read-write STATUS current DESCRIPTION "Regulation domain." -- 1.3.6.1.4.1.1301.2.11 ::= { general 11 } operationalBand OBJECT-TYPE SYNTAX Bands UNITS "MHz" MAX-ACCESS read-write STATUS current DESCRIPTION "Select frequency band." -- 1.3.6.1.4.1.1301.2.12 ::= { general 12 } channelWidth OBJECT-TYPE SYNTAX ChannelWidths UNITS "MHz" MAX-ACCESS read-write STATUS current DESCRIPTION "Select channel bandwidth." -- 1.3.6.1.4.1.1301.2.13 ::= { general 13 } mode OBJECT-TYPE SYNTAX UnitType MAX-ACCESS read-write STATUS current DESCRIPTION "Master or Slave mode. Requires reboot to take effect." -- 1.3.6.1.4.1.1301.2.14 ::= { general 14 } availableChannelsTable OBJECT-TYPE SYNTAX SEQUENCE OF AvailableChannelsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of channels for the selected band." -- 1.3.6.1.4.1.1301.2.15 ::= { general 15 } availableChannelsEntry OBJECT-TYPE SYNTAX AvailableChannelsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The available channels for the selected band." INDEX { channelNumber } -- 1.3.6.1.4.1.1301.2.15.1 ::= { availableChannelsTable 1 } AvailableChannelsEntry ::= SEQUENCE { channelNumber Unsigned32, channelFrequency Unsigned32 } channelNumber OBJECT-TYPE SYNTAX Unsigned32 (1..50) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Channel number." -- 1.3.6.1.4.1.1301.2.15.1.1 ::= { availableChannelsEntry 1 } channelFrequency OBJECT-TYPE SYNTAX Unsigned32 UNITS "KHz" MAX-ACCESS read-only STATUS current DESCRIPTION "Channel's center frequency." -- 1.3.6.1.4.1.1301.2.15.1.2 ::= { availableChannelsEntry 2 } configuredChannelsTable OBJECT-TYPE SYNTAX SEQUENCE OF ConfiguredChannelsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SU channel scan table." -- 1.3.6.1.4.1.1301.2.16 ::= { general 16 } configuredChannelsEntry OBJECT-TYPE SYNTAX ConfiguredChannelsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SU channel scan status." AUGMENTS { availableChannelsEntry } -- 1.3.6.1.4.1.1301.2.16.1 ::= { configuredChannelsTable 1 } ConfiguredChannelsEntry ::= SEQUENCE { channelScan ActivationState } channelScan OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable SU channels (SU will scan channels configured 'on')." -- 1.3.6.1.4.1.1301.2.16.1.1 ::= { configuredChannelsEntry 1 } netMask OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Unit management network mask. Support IPv4 only. Requires reboot to take effect." -- 1.3.6.1.4.1.1301.2.17 ::= { general 17 } gateway OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Unit management gateway IP address. Support IPv4 only. Requires reboot to take effect." -- 1.3.6.1.4.1.1301.2.18 ::= { general 18 } systemAccountTable OBJECT-TYPE SYNTAX SEQUENCE OF SystemAccountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Account list table defining the authorized users allowed to access the system. This table has two predefined entries 'admin' and 'user'." -- 1.3.6.1.4.1.1301.2.19 ::= { general 19 } systemAccountEntry OBJECT-TYPE SYNTAX SystemAccountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Account information." INDEX { systemAccountIndex } -- 1.3.6.1.4.1.1301.2.19.1 ::= { systemAccountTable 1 } SystemAccountEntry ::= SEQUENCE { systemAccountIndex Unsigned32, systemAccountUserName DisplayString, systemAccountUserPassword DisplayString } systemAccountIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the User Account table." -- 1.3.6.1.4.1.1301.2.19.1.1 ::= { systemAccountEntry 1 } systemAccountUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Account Username." -- 1.3.6.1.4.1.1301.2.19.1.2 ::= { systemAccountEntry 2 } systemAccountUserPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Account password." -- 1.3.6.1.4.1.1301.2.19.1.3 ::= { systemAccountEntry 3 } ethernetDataPortTable OBJECT-TYPE SYNTAX SEQUENCE OF EthernetDataPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet ports table." -- 1.3.6.1.4.1.1301.2.20 ::= { general 20 } ethernetDataPortEntry OBJECT-TYPE SYNTAX EthernetDataPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet settings information." INDEX { ethernetDataPortIndex } -- 1.3.6.1.4.1.1301.2.20.1 ::= { ethernetDataPortTable 1 } EthernetDataPortEntry ::= SEQUENCE { ethernetDataPortIndex Unsigned32, ethernetDataPortSettings INTEGER, ethernetDataPortStatus ActivationState } ethernetDataPortIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet port index." -- 1.3.6.1.4.1.1301.2.20.1.1 ::= { ethernetDataPortEntry 1 } ethernetDataPortSettings OBJECT-TYPE SYNTAX INTEGER { autoDetect(1), fullDuplex100(2), fullDuplex10(3), -- halfDuplex100(4), -- halfDuplex10(5), fullDuplex1G(6), fullDuplex2_5G(7), fullDuplex5G(8), fullDuplex10G(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet port duplex settings." -- 1.3.6.1.4.1.1301.2.20.1.2 ::= { ethernetDataPortEntry 2 } ethernetDataPortStatus OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-only STATUS current DESCRIPTION "Ethernet port status." -- 1.3.6.1.4.1.1301.2.20.1.3 ::= { ethernetDataPortEntry 3 } control OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.3 ::= { telradBREEZEAIR 3 } -- Unit Control Parametrs ------------------------------------ operationalChannel OBJECT-TYPE SYNTAX INTEGER (1..101) MAX-ACCESS read-write STATUS current DESCRIPTION "Current channel number." -- 1.3.6.1.4.1.1301.3.1 ::= { control 1 } operationalFrequency OBJECT-TYPE SYNTAX Unsigned32 UNITS "KHz" MAX-ACCESS read-only STATUS current DESCRIPTION "Current operational frequency." -- 1.3.6.1.4.1.1301.3.2 ::= { control 2 } configuredChannel OBJECT-TYPE SYNTAX Unsigned32 (1..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Configured channel." -- 1.3.6.1.4.1.1301.3.3 ::= { control 3 } configuredFrequency OBJECT-TYPE SYNTAX Unsigned32 UNITS "KHz" MAX-ACCESS read-only STATUS current DESCRIPTION "Configured frequency." -- 1.3.6.1.4.1.1301.3.4 ::= { control 4 } acs OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-write STATUS current DESCRIPTION "Automatic Channel Selection. (relevant for MU only). When ACS is enabled, configured channel is ignored and the channel is selected automatically based on the noise level." -- 1.3.6.1.4.1.1301.3.5 ::= { control 5 } dfs OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-write STATUS current DESCRIPTION "Dynamic Frequency Selection - enable/disable Radar detection" -- 1.3.6.1.4.1.1301.3.6 ::= { control 6 } aes OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-write STATUS current DESCRIPTION "Enable\disable 128-bit AES" -- 1.3.6.1.4.1.1301.3.7 ::= { control 7 } aesKey OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "AES pre shared key. Maximum of 16 characters, Alphabetical or numeric." -- 1.3.6.1.4.1.1301.3.8 ::= { control 8 } txPower OBJECT-TYPE SYNTAX INTEGER (-50..22) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Configured Tx power in dBm." -- 1.3.6.1.4.1.1301.3.9 ::= { control 9 } atpc OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-write STATUS current DESCRIPTION "Enable\disable Automatic Transmit Power Control " -- 1.3.6.1.4.1.1301.3.12 ::= { control 12 } atpcPwr OBJECT-TYPE SYNTAX INTEGER (-70..-50) MAX-ACCESS read-write STATUS current DESCRIPTION "Required ATPC level. (relevant for MU only)." -- 1.3.6.1.4.1.1301.3.13 ::= { control 13 } buzzer OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-write STATUS current DESCRIPTION "Enable\disable RSSI buzzer." -- 1.3.6.1.4.1.1301.3.14 ::= { control 14 } antennaMode OBJECT-TYPE SYNTAX INTEGER { mimo(1), siso(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "MIMO or SISO mode." -- 1.3.6.1.4.1.1301.3.15 ::= { control 15 } diversity OBJECT-TYPE SYNTAX DiversityMode MAX-ACCESS read-write STATUS current DESCRIPTION "Unit diversity mode." -- 1.3.6.1.4.1.1301.3.16 ::= { control 16 } sysMode OBJECT-TYPE SYNTAX SystemMode MAX-ACCESS read-write STATUS current DESCRIPTION "MU system mode." -- 1.3.6.1.4.1.1301.3.17 ::= { control 17 } minRate OBJECT-TYPE SYNTAX INTEGER { rBPSK1Over2(1), rQPSK1Over2(2), rQPSK3Over4(3), r16QAM1Over2(4), r16QAM3Over4(5), r64QAM2Over3(6), r64QAM3Over4(7), r64QAM5Over6(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "MU minimum Downlink rate." -- 1.3.6.1.4.1.1301.3.18 ::= { control 18 } muRotate OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable communication between SUs of a single PTMP MU." -- 1.3.6.1.4.1.1301.3.19 ::= { control 19 } vlanQinQ OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Configure MU QinQ vlan tagging. (relevant for MU only). When QinQ is enabled, each SU in QinQ/VLAN-filter mode will have double tag. The outer vlan field must be provided in hex-decima format TTTTPIII: TTTT: is 8100 for stacking, or 9100 for QinQ, or 88a8 for 801q-ad. P: priority (0-7) which is multiplied by 2, hence (0-E, only even numbers). III: outer VLAN tag (0-4095, in Hex format)." -- 1.3.6.1.4.1.1301.3.20 ::= { control 20 } vlanPri OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the SU's VLAN priority (0-7) in VLAN or QinQ/VLAN-filter modes. (relevant for SU only). The SU will tag/untag the packets and also inject the configured vlan priority in addition to VLAN tag." DEFVAL { 0 } -- 1.3.6.1.4.1.1301.3.21 ::= { control 21 } operationalRxChannel OBJECT-TYPE SYNTAX INTEGER (1..50) MAX-ACCESS read-write STATUS current DESCRIPTION "Current RX channel number. If different than operational (TX) channel enters FDD mode." -- 1.3.6.1.4.1.1301.3.22 ::= { control 22 } sidu OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.3.30 ::= { control 30 } siduCfg OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.3.30.1 ::= { sidu 1 } siduSystem OBJECT-TYPE SYNTAX INTEGER { tdmE1(1), tdmT1(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "S-IDU mode - E1/T1." -- 1.3.6.1.4.1.1301.3.30.1.1 ::= { siduCfg 1 } siduMgmtIp OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "S-IDU management IP." -- 1.3.6.1.4.1.1301.3.30.1.2 ::= { siduCfg 2 } siduDataIp OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "S-IDU data IP." -- 1.3.6.1.4.1.1301.3.30.1.3 ::= { siduCfg 3 } siduRemoteIp OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "S-IDU remote data IP." -- 1.3.6.1.4.1.1301.3.30.1.4 ::= { siduCfg 4 } siduJitterBuffer OBJECT-TYPE SYNTAX Unsigned32 (0..200) MAX-ACCESS read-write STATUS current DESCRIPTION "S-IDU jitter buffer in msec." -- 1.3.6.1.4.1.1301.3.30.1.5 ::= { siduCfg 5 } siduVlanTag OBJECT-TYPE SYNTAX Unsigned32 (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "S-IDU data vlan tag." -- 1.3.6.1.4.1.1301.3.30.1.6 ::= { siduCfg 6 } siduVlanPri OBJECT-TYPE SYNTAX Unsigned32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "S-IDU vlan priority. note: to prioritize S-IDU traffic the priority must be non-zero, and the system mode must be PTP+QOS." -- 1.3.6.1.4.1.1301.3.30.1.7 ::= { siduCfg 7 } siduClock OBJECT-TYPE SYNTAX SiduClockMode MAX-ACCESS read-write STATUS current DESCRIPTION "S-IDU clock mode. defualt value is Loopback(MU)-Adaptive(SU)." -- 1.3.6.1.4.1.1301.3.30.1.8 ::= { siduCfg 8 } siduMonitor OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.3.30.2 ::= { sidu 2 } siduPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SiduPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "S-IDU alarm table." -- 1.3.6.1.4.1.1301.3.30.2.1 ::= { siduMonitor 1 } siduPortEntry OBJECT-TYPE SYNTAX SiduPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "S-IDU alarm information." INDEX { siduPortNumber } -- 1.3.6.1.4.1.1301.3.30.2.1.1 ::= { siduPortTable 1 } SiduPortEntry ::= SEQUENCE { siduPortNumber Counter32, siduPortEnabled ActivationState, siduPortLocalErr ActivationState, siduPortRemoteErr ActivationState } siduPortNumber OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "S-IDU Port index. Note: The number of ports is defined by S-IDU license." -- 1.3.6.1.4.1.1301.3.30.2.1.1.1 ::= { siduPortEntry 1 } siduPortEnabled OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-create STATUS current DESCRIPTION "Activate/Deactivate S-IDU port." -- 1.3.6.1.4.1.1301.3.30.2.1.1.2 ::= { siduPortEntry 2 } siduPortLocalErr OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-create STATUS current DESCRIPTION "Indicate local port is disconnected (red led)." -- 1.3.6.1.4.1.1301.3.30.2.1.1.3 ::= { siduPortEntry 3 } siduPortRemoteErr OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-create STATUS current DESCRIPTION "Indicate remote port is disconnected (green led)." -- 1.3.6.1.4.1.1301.3.30.2.1.1.3 ::= { siduPortEntry 4 } monitor OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.4 ::= { telradBREEZEAIR 4 } -- Monitoring infomation table status OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-only STATUS current DESCRIPTION "Unit status - online/offline." -- 1.3.6.1.4.1.1301.4.1 ::= { monitor 1 } rssi OBJECT-TYPE SYNTAX Integer32 (-95..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Unit RSSI in dBm." -- 1.3.6.1.4.1.1301.4.2 ::= { monitor 2 } peerRssi OBJECT-TYPE SYNTAX Integer32 (-95..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Peer Unit RSSI in dBm." -- 1.3.6.1.4.1.1301.4.3 ::= { monitor 3 } per OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "Unit Rx packet error rate in %." -- 1.3.6.1.4.1.1301.4.4 ::= { monitor 4 } peerPer OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "Peer Unit Rx packet error rate in %." -- 1.3.6.1.4.1.1301.4.5 ::= { monitor 5 } txTraf OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx bytes counter - indicates number of transmitted bytes." -- 1.3.6.1.4.1.1301.4.6 ::= { monitor 6 } rxTraf OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx bytes counter - indicates number of received bytes." -- 1.3.6.1.4.1.1301.4.7 ::= { monitor 7 } curTxModulation OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-only STATUS current DESCRIPTION "The current transmission rate." -- 1.3.6.1.4.1.1301.4.8 ::= { monitor 8 } curRxModulation OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-only STATUS current DESCRIPTION "The current reception rate.Note: meaningful only in SU or MU PTP" -- 1.3.6.1.4.1.1301.4.9 ::= { monitor 9 } -- Performance Management ------------------------------------ intervalCounters OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.4.10 ::= { monitor 10 } channelMeasurementTable OBJECT-TYPE SYNTAX SEQUENCE OF ChannelMeasurementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Channel measurement table. Note: In PTMP network, channel measurement values should be collected from the SU." -- 1.3.6.1.4.1.1301.4.10.1 ::= { intervalCounters 1 } channelMeasurementEntry OBJECT-TYPE SYNTAX ChannelMeasurementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { channelDirection, histogramIndex } -- 1.3.6.1.4.1.1301.4.10.1.1 ::= { channelMeasurementTable 1 } ChannelMeasurementEntry ::= SEQUENCE { channelDirection INTEGER, histogramIndex Unsigned32, minRssi Integer32, meanRssi Integer32, maxRssi Integer32, minPer Unsigned32, meanPer Unsigned32, maxPer Unsigned32, minModulation ModulationRates, meanModulation ModulationRates, maxModulation ModulationRates, minTxPower INTEGER, meanTxPower INTEGER, maxTxPower INTEGER, minSN0 INTEGER, meanSN0 INTEGER, maxSN0 INTEGER, minSN1 INTEGER, meanSN1 INTEGER, maxSN1 INTEGER, minAISThreshold INTEGER, meanAISThreshold INTEGER, maximumAISThreshold INTEGER, crcs Counter64, packetCount Counter64, byteCount Counter64, singleARQRetx Counter64, doubleARQRetx Counter64, tripleARQRetx Counter64 } channelDirection OBJECT-TYPE SYNTAX INTEGER { downlink(1), uplink(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Channel measurement direction (downlink/uplink)." -- 1.3.6.1.4.1.1301.4.10.1.1.1 ::= { channelMeasurementEntry 1 } histogramIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Measurement sample index." -- 1.3.6.1.4.1.1301.4.10.1.1.2 ::= { channelMeasurementEntry 2 } minRssi OBJECT-TYPE SYNTAX Integer32 (-95..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum RSSI measured in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.3 ::= { channelMeasurementEntry 3 } meanRssi OBJECT-TYPE SYNTAX Integer32 (-95..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Mean RSSI measured in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.4 ::= { channelMeasurementEntry 4 } maxRssi OBJECT-TYPE SYNTAX Integer32 (-95..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum RSSI measured in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.5 ::= { channelMeasurementEntry 5 } minPer OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum PER measured in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.6 ::= { channelMeasurementEntry 6 } meanPer OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Mean PER measured in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.7 ::= { channelMeasurementEntry 7 } maxPer OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum PER measured in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.8 ::= { channelMeasurementEntry 8 } minModulation OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum modulation measured in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.9 ::= { channelMeasurementEntry 9 } meanModulation OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-only STATUS current DESCRIPTION "Mean modulation measured in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.10 ::= { channelMeasurementEntry 10 } maxModulation OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum modulation measured in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.11 ::= { channelMeasurementEntry 11 } minTxPower OBJECT-TYPE SYNTAX INTEGER (-50..22) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Tx power measured in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.12 ::= { channelMeasurementEntry 12 } meanTxPower OBJECT-TYPE SYNTAX INTEGER (-50..22) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Mean Tx power measured in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.13 ::= { channelMeasurementEntry 13 } maxTxPower OBJECT-TYPE SYNTAX INTEGER (-50..22) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Tx power measured in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.14 ::= { channelMeasurementEntry 14 } minSN0 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Signal value of RF port 0. This value is significat only when compared to SN1 values." -- 1.3.6.1.4.1.1301.4.10.1.1.15 ::= { channelMeasurementEntry 15 } meanSN0 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Mean Signal value of RF port 0. This value is significat only when compared to SN1 values." -- 1.3.6.1.4.1.1301.4.10.1.1.16 ::= { channelMeasurementEntry 16 } maxSN0 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Signal value of RF port 0. This value is significat only when compared to SN1 values." -- 1.3.6.1.4.1.1301.4.10.1.1.17 ::= { channelMeasurementEntry 17 } minSN1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Signal value of RF port 1. This value is significat only when compared to SN0 values." -- 1.3.6.1.4.1.1301.4.10.1.1.18 ::= { channelMeasurementEntry 18 } meanSN1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Mean Signal value of RF port 1. This value is significat only when compared to SN0 values." -- 1.3.6.1.4.1.1301.4.10.1.1.19 ::= { channelMeasurementEntry 19 } maxSN1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Signal value of RF port 1. This value is significat only when compared to SN0 values." -- 1.3.6.1.4.1.1301.4.10.1 ::= { channelMeasurementEntry 20 } minAISThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.1301.4.10.1.1.21 ::= { channelMeasurementEntry 21 } meanAISThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.1301.4.10.1.1.22 ::= { channelMeasurementEntry 22 } maximumAISThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.1301.4.10.1.1.23 ::= { channelMeasurementEntry 23 } crcs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "CRC errors measured in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.24 ::= { channelMeasurementEntry 24 } packetCount OBJECT-TYPE SYNTAX Counter64 UNITS "pkts" MAX-ACCESS read-only STATUS current DESCRIPTION "Packets transmitted/received in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.25 ::= { channelMeasurementEntry 25 } byteCount OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes transmitted/received in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.26 ::= { channelMeasurementEntry 26 } singleARQRetx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of single ARQ in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.27 ::= { channelMeasurementEntry 27 } doubleARQRetx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of double ARQ in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.28 ::= { channelMeasurementEntry 28 } tripleARQRetx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of triple ARQ in the interval." -- 1.3.6.1.4.1.1301.4.10.1.1.29 ::= { channelMeasurementEntry 29 } dailyMeasurementTable OBJECT-TYPE SYNTAX SEQUENCE OF DailyMeasurementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Daily channel measurement table. Note: In PTMP network, channel measurement values should be collected from the SU." -- 1.3.6.1.4.1.1301.4.10.2 ::= { intervalCounters 2 } dailyMeasurementEntry OBJECT-TYPE SYNTAX DailyMeasurementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { dataDirection, dataIndex } -- 1.3.6.1.4.1.1301.4.10.2.1 ::= { dailyMeasurementTable 1 } DailyMeasurementEntry ::= SEQUENCE { dataDirection INTEGER, dataIndex Unsigned32, minRssiDaily Integer32, meanRssiDaily Integer32, maxRssiDaily Integer32, minPerDaily Unsigned32, meanPerDaily Unsigned32, maxPerDaily Unsigned32, minModulationDaily ModulationRates, meanModulationDaily ModulationRates, maxModulationDaily ModulationRates, minTxPowerDaily INTEGER, meanTxPowerDaily INTEGER, maxTxPowerDaily INTEGER, minSN0Daily INTEGER, meanSN0Daily INTEGER, maxSN0Daily INTEGER, minSN1Daily INTEGER, meanSN1Daily INTEGER, maxSN1Daily INTEGER, minAISThresholdDaily INTEGER, meanAISThresholdDaily INTEGER, maximumAISThresholdDaily INTEGER, crcsDaily Counter64, packetCountDaily Counter64, byteCountDaily Counter64, singleARQRetxDaily Counter64, doubleARQRetxDaily Counter64, tripleARQRetxDaily Counter64, minCountDaily Counter64, maxCountDaily Counter64 } dataDirection OBJECT-TYPE SYNTAX INTEGER { downlink(1), uplink(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Channel measurement direction (downlink/uplink)." -- 1.3.6.1.4.1.1301.4.10.2.1.1 ::= { dailyMeasurementEntry 1 } dataIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measurement sample index." -- 1.3.6.1.4.1.1301.4.10.2.1.2 ::= { dailyMeasurementEntry 2 } minRssiDaily OBJECT-TYPE SYNTAX Integer32 (-95..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum RSSI measured in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.3 ::= { dailyMeasurementEntry 3 } meanRssiDaily OBJECT-TYPE SYNTAX Integer32 (-95..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Mean RSSI measured in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.4 ::= { dailyMeasurementEntry 4 } maxRssiDaily OBJECT-TYPE SYNTAX Integer32 (-95..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum RSSI measured in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.5 ::= { dailyMeasurementEntry 5 } minPerDaily OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum PER measured in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.6 ::= { dailyMeasurementEntry 6 } meanPerDaily OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Mean PER measured in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.7 ::= { dailyMeasurementEntry 7 } maxPerDaily OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum PER measured in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.8 ::= { dailyMeasurementEntry 8 } minModulationDaily OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum modulation measured in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.9 ::= { dailyMeasurementEntry 9 } meanModulationDaily OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-only STATUS current DESCRIPTION "Mean modulation measured in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.10 ::= { dailyMeasurementEntry 10 } maxModulationDaily OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum modulation measured in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.11 ::= { dailyMeasurementEntry 11 } minTxPowerDaily OBJECT-TYPE SYNTAX INTEGER (-50..22) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Tx power measured in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.12 ::= { dailyMeasurementEntry 12 } meanTxPowerDaily OBJECT-TYPE SYNTAX INTEGER (-50..22) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Mean Tx power measured in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.13 ::= { dailyMeasurementEntry 13 } maxTxPowerDaily OBJECT-TYPE SYNTAX INTEGER (-50..22) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Tx power measured in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.14 ::= { dailyMeasurementEntry 14 } minSN0Daily OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Signal value of RF port 0. This value is significat only when compared to SN1 values." -- 1.3.6.1.4.1.1301.4.10.2.1.15 ::= { dailyMeasurementEntry 15 } meanSN0Daily OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Mean Signal value of RF port 0. This value is significat only when compared to SN1 values." -- 1.3.6.1.4.1.1301.4.10.2.1.16 ::= { dailyMeasurementEntry 16 } maxSN0Daily OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Signal value of RF port 0. This value is significat only when compared to SN1 values." -- 1.3.6.1.4.1.1301.4.10.2.1.17 ::= { dailyMeasurementEntry 17 } minSN1Daily OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Signal value of RF port 1. This value is significat only when compared to SN0 values." -- 1.3.6.1.4.1.1301.4.10.2.1.18 ::= { dailyMeasurementEntry 18 } meanSN1Daily OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Mean Signal value of RF port 1. This value is significat only when compared to SN0 values." -- 1.3.6.1.4.1.1301.4.10.2.1.19 ::= { dailyMeasurementEntry 19 } maxSN1Daily OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Signal value of RF port 1. This value is significat only when compared to SN0 values." -- 1.3.6.1.4.1.1301.4.10.2.1.20 ::= { dailyMeasurementEntry 20 } minAISThresholdDaily OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.1301.4.10.2.1.21 ::= { dailyMeasurementEntry 21 } meanAISThresholdDaily OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.1301.4.10.2.1.22 ::= { dailyMeasurementEntry 22 } maximumAISThresholdDaily OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.1301.4.10.2.1.23 ::= { dailyMeasurementEntry 23 } crcsDaily OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "CRC errors measured in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.24 ::= { dailyMeasurementEntry 24 } packetCountDaily OBJECT-TYPE SYNTAX Counter64 UNITS "pkts" MAX-ACCESS read-only STATUS current DESCRIPTION "Packets transmitted/received in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.25 ::= { dailyMeasurementEntry 25 } byteCountDaily OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes transmitted/received in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.26 ::= {dailyMeasurementEntry 26 } singleARQRetxDaily OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of single ARQ in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.27 ::= { dailyMeasurementEntry 27 } doubleARQRetxDaily OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of double ARQ in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.28 ::= { dailyMeasurementEntry 28 } tripleARQRetxDaily OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of triple ARQ in the interval." -- 1.3.6.1.4.1.1301.4.10.2.1.29 ::= { dailyMeasurementEntry 29 } minCountDaily OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum bytes transmitted/received in a 1 minute interval." -- 1.3.6.1.4.1.1301.4.10.2.1.30 ::= { dailyMeasurementEntry 30 } maxCountDaily OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum bytes transmitted/received in a 1 minute interval." -- 1.3.6.1.4.1.1301.4.10.2.1.31 ::= { dailyMeasurementEntry 31 } weeklyMeasurementTable OBJECT-TYPE SYNTAX SEQUENCE OF WeeklyMeasurementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Weekly channel measurement table. Note: In PTMP network, channel measurement values should be collected from the SU." -- 1.3.6.1.4.1.1301.4.10.3 ::= { intervalCounters 3 } weeklyMeasurementEntry OBJECT-TYPE SYNTAX WeeklyMeasurementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { infoDirection, infoIndex } -- 1.3.6.1.4.1.1301.4.10.3.1 ::= { weeklyMeasurementTable 1 } WeeklyMeasurementEntry ::= SEQUENCE { infoDirection INTEGER, infoIndex Unsigned32, minRssiWeekly Integer32, meanRssiWeekly Integer32, maxRssiWeekly Integer32, minPerWeekly Unsigned32, meanPerWeekly Unsigned32, maxPerWeekly Unsigned32, minModulationWeekly ModulationRates, meanModulationWeekly ModulationRates, maxModulationWeekly ModulationRates, minTxPowerWeekly INTEGER, meanTxPowerWeekly INTEGER, maxTxPowerWeekly INTEGER, minSN0Weekly INTEGER, meanSN0Weekly INTEGER, maxSN0Weekly INTEGER, minSN1Weekly INTEGER, meanSN1Weekly INTEGER, maxSN1Weekly INTEGER, minAISThresholdWeekly INTEGER, meanAISThresholdWeekly INTEGER, maximumAISThresholdWeekly INTEGER, crcsWeekly Counter64, packetCountWeekly Counter64, byteCountWeekly Counter64, singleARQRetxWeekly Counter64, doubleARQRetxWeekly Counter64, tripleARQRetxWeekly Counter64, minCountWeekly Counter64, maxCountWeekly Counter64 } infoDirection OBJECT-TYPE SYNTAX INTEGER { downlink(1), uplink(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Channel measurement direction (downlink/uplink)." -- 1.3.6.1.4.1.1301.4.10.3.1.1 ::= { weeklyMeasurementEntry 1 } infoIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Measurement sample index." -- 1.3.6.1.4.1.1301.4.10.3.1.2 ::= { weeklyMeasurementEntry 2 } minRssiWeekly OBJECT-TYPE SYNTAX Integer32 (-95..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum RSSI measured in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.3 ::= { weeklyMeasurementEntry 3 } meanRssiWeekly OBJECT-TYPE SYNTAX Integer32 (-95..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Mean RSSI measured in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.4 ::= { weeklyMeasurementEntry 4 } maxRssiWeekly OBJECT-TYPE SYNTAX Integer32 (-95..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum RSSI measured in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.5 ::= { weeklyMeasurementEntry 5 } minPerWeekly OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum PER measured in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.6 ::= { weeklyMeasurementEntry 6 } meanPerWeekly OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Mean PER measured in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.7 ::= { weeklyMeasurementEntry 7 } maxPerWeekly OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum PER measured in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.8 ::= { weeklyMeasurementEntry 8 } minModulationWeekly OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum modulation measured in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.9 ::= { weeklyMeasurementEntry 9 } meanModulationWeekly OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-only STATUS current DESCRIPTION "Mean modulation measured in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.10 ::= { weeklyMeasurementEntry 10 } maxModulationWeekly OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum modulation measured in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.11 ::= { weeklyMeasurementEntry 11 } minTxPowerWeekly OBJECT-TYPE SYNTAX INTEGER (-50..22) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Tx power measured in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.12 ::= { weeklyMeasurementEntry 12 } meanTxPowerWeekly OBJECT-TYPE SYNTAX INTEGER (-50..22) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Mean Tx power measured in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.13 ::= { weeklyMeasurementEntry 13 } maxTxPowerWeekly OBJECT-TYPE SYNTAX INTEGER (-50..22) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Tx power measured in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.14 ::= { weeklyMeasurementEntry 14 } minSN0Weekly OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Signal value of RF port 0. This value is significat only when compared to SN1 values." -- 1.3.6.1.4.1.1301.4.10.3.1.15 ::= { weeklyMeasurementEntry 15 } meanSN0Weekly OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Mean Signal value of RF port 0. This value is significat only when compared to SN1 values." -- 1.3.6.1.4.1.1301.4.10.3.1.16 ::= { weeklyMeasurementEntry 16 } maxSN0Weekly OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Signal value of RF port 0. This value is significat only when compared to SN1 values." -- 1.3.6.1.4.1.1301.4.10.3.1.17 ::= { weeklyMeasurementEntry 17 } minSN1Weekly OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum Signal value of RF port 1. This value is significat only when compared to SN0 values." -- 1.3.6.1.4.1.1301.4.10.3.1.18 ::= { weeklyMeasurementEntry 18 } meanSN1Weekly OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Mean Signal value of RF port 1. This value is significat only when compared to SN0 values." -- 1.3.6.1.4.1.1301.4.10.3.1.19 ::= { weeklyMeasurementEntry 19 } maxSN1Weekly OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Signal value of RF port 1. This value is significat only when compared to SN0 values." -- 1.3.6.1.4.1.1301.4.10.3.1.20 ::= { weeklyMeasurementEntry 20 } minAISThresholdWeekly OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.1301.4.10.3.1.21 ::= { weeklyMeasurementEntry 21 } meanAISThresholdWeekly OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.1301.4.10.3.1.22 ::= { weeklyMeasurementEntry 22 } maximumAISThresholdWeekly OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "" -- 1.3.6.1.4.1.1301.4.10.3.1.23 ::= { weeklyMeasurementEntry 23 } crcsWeekly OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "CRC errors measured in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.24 ::= { weeklyMeasurementEntry 24 } packetCountWeekly OBJECT-TYPE SYNTAX Counter64 UNITS "pkts" MAX-ACCESS read-only STATUS current DESCRIPTION "Packets transmitted/received in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.25 ::= { weeklyMeasurementEntry 25 } byteCountWeekly OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes transmitted/received in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.26 ::= {weeklyMeasurementEntry 26 } singleARQRetxWeekly OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of single ARQ in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.27 ::= { weeklyMeasurementEntry 27 } doubleARQRetxWeekly OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of double ARQ in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.28 ::= { weeklyMeasurementEntry 28 } tripleARQRetxWeekly OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of triple ARQ in the interval." -- 1.3.6.1.4.1.1301.4.10.3.1.29 ::= { weeklyMeasurementEntry 29 } minCountWeekly OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum bytes transmitted/received in a 15 minute interval." -- 1.3.6.1.4.1.1301.4.10.3.1.30 ::= { weeklyMeasurementEntry 30 } maxCountWeekly OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum bytes transmitted/received in a 15 minute interval." -- 1.3.6.1.4.1.1301.4.10.3.1.31 ::= { weeklyMeasurementEntry 31 } -- -- Monitor table continued -- nmsHeartBeatInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current information for NMS. Note: meaningful only in MU" -- 1.3.6.1.4.1.1301.4.11 ::= { monitor 11} nmsUnitInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current Unit Information for NMS. Note: meaningful only in MU" -- 1.3.6.1.4.1.1301.4.12 ::= { monitor 12 } nmsSlaInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current SLA Information for NMS. Note: meaningful only in MU" -- 1.3.6.1.4.1.1301.4.13 ::= { monitor 13} nmsMonitoringInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current Monitoring Information for NMS. Note: meaningful only in MU" -- 1.3.6.1.4.1.1301.4.14 ::= { monitor 14 } curDiversityStatus OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-only STATUS current DESCRIPTION "The current diversity status.Note: on/off useful if diversity is automatic" -- 1.3.6.1.4.1.1301.4.15 ::= { monitor 15 } txKbps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx throughput in Kbps." -- 1.3.6.1.4.1.1301.4.16 ::= { monitor 16 } rxKbps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx throughput in Kbps" -- 1.3.6.1.4.1.1301.4.17 ::= { monitor 17} crcCtr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "CRC running counter" -- 1.3.6.1.4.1.1301.4.18 ::= { monitor 18} arqCtr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "ARQ running counter" -- 1.3.6.1.4.1.1301.4.19 ::= { monitor 19 } arq2Ctr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Double ARQ running counter" -- 1.3.6.1.4.1.1301.4.20 ::= { monitor 20} dropCtr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Drops running counter" -- 1.3.6.1.4.1.1301.4.21 ::= { monitor 21 } capacityMbps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Tx capacity in Mbps.Note: In PTMP only relevant in SU" -- 1.3.6.1.4.1.1301.4.22 ::= { monitor 22 } availableThroughputDL OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Available throughput for downlink in Mbps.Note: In PTMP only relevant in SU" -- 1.3.6.1.4.1.1301.4.23 ::= { monitor 23 } availableThroughputUL OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Available throughput for uplink in Mbps.Note: In PTMP only relevant in SU" -- 1.3.6.1.4.1.1301.4.24 ::= { monitor 24 } availableThroughput5050 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "availableThroughput for 50%/50% ratio in Mbps.Note: In PTMP only relevant in SU" -- 1.3.6.1.4.1.1301.4.25 ::= { monitor 25 } -- Peers Unit ------------------------------------ peers OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.5 ::= { telradBREEZEAIR 5 } peerUnitsTable OBJECT-TYPE SYNTAX SEQUENCE OF PeerUnitsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Peers table (relevant to MU only)." -- 1.3.6.1.4.1.1301.5.1 ::= { peers 1 } peerUnitsEntry OBJECT-TYPE SYNTAX PeerUnitsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SU information (relevant to MU only)." INDEX { peerNumber } -- 1.3.6.1.4.1.1301.5.1.1 ::= { peerUnitsTable 1 } PeerUnitsEntry ::= SEQUENCE { peerNumber Unsigned32, peerMac MacAddress, peerActive ActivationState, peerIPAddress InetAddress, peerTxRate ModulationRates, peerRxRate ModulationRates, peerTxBw Unsigned32, peerRxBw Unsigned32, peerIpFilter IpFilterType, peerFilterAddr DisplayString, peerFilter1Addr DisplayString, peerFilter2Addr DisplayString, peerNetworkMode NetworkMode, peerVlans DisplayString, peerOnline ActivationState, peerCurTxRate ModulationRates, peerCurRxRate ModulationRates, peerServiceType ServiceTypes, peerMinTxRate ModulationRates, peerMaxTxRate ModulationRates, peerMinRxRate ModulationRates, peerMaxRxRate ModulationRates, peerCapacityMbps Unsigned32} peerNumber OBJECT-TYPE SYNTAX Unsigned32 (0..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Peer index." -- 1.3.6.1.4.1.1301.5.1.1.1 ::= { peerUnitsEntry 1 } peerMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Peer MAC address." -- 1.3.6.1.4.1.1301.5.1.1.2 ::= { peerUnitsEntry 2 } peerActive OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/disable peer." -- 1.3.6.1.4.1.1301.5.1.1.3 ::= { peerUnitsEntry 3 } peerIPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "Peer IP address. Support IPv4 only." -- 1.3.6.1.4.1.1301.5.1.1.4 ::= { peerUnitsEntry 4 } peerTxRate OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-write STATUS current DESCRIPTION "Configure peer Tx modulation." -- 1.3.6.1.4.1.1301.5.1.1.5 ::= { peerUnitsEntry 5 } peerRxRate OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-write STATUS current DESCRIPTION "Configure peer Rx modulation." -- 1.3.6.1.4.1.1301.5.1.1.6 ::= { peerUnitsEntry 6 } peerTxBw OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configure peer maximum Tx throughput (in Mbps)." -- 1.3.6.1.4.1.1301.5.1.1.7 ::= { peerUnitsEntry 7 } peerRxBw OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configure peer maximum Rx throughput (in Mbps)." -- 1.3.6.1.4.1.1301.5.1.1.8 ::= { peerUnitsEntry 8 } -- peerIpFilter OBJECT-TYPE -- SYNTAX IpFilterType -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Configure IP filter type." -- -- 1.3.6.1.4.1.1301.5.1.1.9 -- ::= { peerUnitsEntry 9 } -- peerFilterAddr OBJECT-TYPE -- SYNTAX DisplayString (SIZE (0..18)) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Configure the first authorized IPV4 network (for IP filter type 3 - addronly). -- Example 1: 10.1.101.101/24 will authorize 10.1.101.x addresses. -- Example 2: to remove the filter set 0.0.0.0/0 or 10.1.101.101/0. -- Note: removing peerFilterAddr will also disable peerFilter1Addr and peerFilter2Addr." -- -- -- 1.3.6.1.4.1.1301.5.1.1.10 -- ::= { peerUnitsEntry 10 } -- peerFilter1Addr OBJECT-TYPE -- SYNTAX DisplayString (SIZE (0..18)) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Configure the second authorized IPV4 network (for IP filter type 3 - addronly). -- Example 1: 10.1.101.101/24 will authorize 10.1.101.x addresses. -- Example 2: to remove the filter set 0.0.0.0/0 or 10.1.101.101/0. -- Note: removing peerFilter1Addr will also disable peerFilter2Addr." -- -- 1.3.6.1.4.1.1301.5.1.1.11 -- ::= { peerUnitsEntry 11 } -- peerFilter2Addr OBJECT-TYPE -- SYNTAX DisplayString (SIZE (0..18)) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Configure the third authorized IPV4 network (for IP filter type 3 - addronly)." -- -- 1.3.6.1.4.1.1301.5.1.1.12 -- ::= { peerUnitsEntry 12 } peerNetworkMode OBJECT-TYPE SYNTAX NetworkMode MAX-ACCESS read-create STATUS current DESCRIPTION "Configure peer network mode." -- 1.3.6.1.4.1.1301.5.1.1.13 ::= { peerUnitsEntry 13 } peerVlans OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Configure peer vlan tags. The vlans are seperated by a (.). Example: 100.200 -> The SU will tag/untag packets with 100, and pass packets with vlan tag 200 transparently." -- 1.3.6.1.4.1.1301.5.1.1.14 ::= { peerUnitsEntry 14 } peerOnline OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-create STATUS current DESCRIPTION "Peer link status." -- 1.3.6.1.4.1.1301.5.1.1.15 ::= { peerUnitsEntry 15 } peerCurTxRate OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-create STATUS current DESCRIPTION "Peer current Tx modulation." -- 1.3.6.1.4.1.1301.5.1.1.16 ::= { peerUnitsEntry 16 } peerCurRxRate OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-create STATUS current DESCRIPTION "Peer current Rx modulation." -- 1.3.6.1.4.1.1301.5.1.1.17 ::= { peerUnitsEntry 17 } peerServiceType OBJECT-TYPE SYNTAX ServiceTypes MAX-ACCESS read-create STATUS current DESCRIPTION "Peer current Rx modulation." -- 1.3.6.1.4.1.1301.5.1.1.18 ::= { peerUnitsEntry 18 } peerMinTxRate OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-create STATUS current DESCRIPTION "Peer Minimum Tx modulation when in automatic (adaptive) modulation." -- 1.3.6.1.4.1.1301.5.1.1.19 ::= { peerUnitsEntry 19 } peerMaxTxRate OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-create STATUS current DESCRIPTION "Peer Maximum Tx modulation when in automatic (adaptive) modulation." -- 1.3.6.1.4.1.1301.5.1.1.20 ::= { peerUnitsEntry 20 } peerMinRxRate OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-create STATUS current DESCRIPTION "Peer Minimum Rx modulation when in automatic (adaptive) modulation." -- 1.3.6.1.4.1.1301.5.1.1.21 ::= { peerUnitsEntry 21 } peerMaxRxRate OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-create STATUS current DESCRIPTION "Peer Maximum Rx modulation when in automatic (adaptive) modulation." -- 1.3.6.1.4.1.1301.5.1.1.22 ::= { peerUnitsEntry 22 } peerCapacityMbps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Peer current capacity (50-50) in Mbps." -- 1.3.6.1.4.1.1301.5.1.1.23 ::= { peerUnitsEntry 23 } peerOperationalUnitsTable OBJECT-TYPE SYNTAX SEQUENCE OF PeerOperationalUnitsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Peers operational table (relevant to MU only)." -- 1.3.6.1.4.1.1301.5.2 ::= { peers 2 } peerOperationalUnitsEntry OBJECT-TYPE SYNTAX PeerOperationalUnitsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SU information (relevant to MU only)." AUGMENTS { peerUnitsEntry } -- 1.3.6.1.4.1.1301.5.2.1 ::= { peerOperationalUnitsTable 1 } PeerOperationalUnitsEntry ::= SEQUENCE { peerOperationalTxRate Gauge32, peerOperationalRxRate Gauge32, peerOperationalTxModulation ModulationRates, peerOperationalRxModulation ModulationRates } peerOperationalTxRate OBJECT-TYPE SYNTAX Gauge32 UNITS "Mbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Peer maximum Tx throughput." -- 1.3.6.1.4.1.1301.5.2.1.1 ::= { peerOperationalUnitsEntry 1 } peerOperationalRxRate OBJECT-TYPE SYNTAX Gauge32 UNITS "Mbps" MAX-ACCESS read-only STATUS current DESCRIPTION "Peer maximum Rx throughput." -- 1.3.6.1.4.1.1301.5.2.1.2 ::= { peerOperationalUnitsEntry 2 } peerOperationalTxModulation OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-only STATUS current DESCRIPTION "Peer current Tx modulation." -- 1.3.6.1.4.1.1301.5.2.1.3 ::= { peerOperationalUnitsEntry 3 } peerOperationalRxModulation OBJECT-TYPE SYNTAX ModulationRates MAX-ACCESS read-only STATUS current DESCRIPTION "Peer current Rx modulation." -- 1.3.6.1.4.1.1301.5.2.1.4 ::= { peerOperationalUnitsEntry 4 } operations OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.6 ::= { telradBREEZEAIR 6 } -- Traps and alarms ------------------------------------ alarmID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Last alarmID issued by the unit with format ID DESC param1,param2,param3...." -- 1.3.6.1.4.1.1301.6.1 ::= { operations 1 } operSubmit OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set - submit unit configuration to update its FLASH memory. Unit will reset and set the reset text as specified. Get - display the last reset text." -- 1.3.6.1.4.1.1301.6.2 ::= { operations 2 } operReset OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Set - reset unit and set the reset text as specified. Get - display the last reset text." -- 1.3.6.1.4.1.1301.6.3 ::= { operations 3 } genEquipFault OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.6.4 ::= { operations 4 } genEquipCurrentAlarm OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.6.4.1 ::= { genEquipFault 1 } genEquipCurrentAlarmLastChangeCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last alarm added into the table." -- 1.3.6.1.4.1.1301.6.4.1.1 ::= { genEquipCurrentAlarm 1 } genEquipCurrentAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF GenEquipCurrentAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarms table." -- 1.3.6.1.4.1.1301.6.4.1.2 ::= { genEquipCurrentAlarm 2 } genEquipCurrentAlarmEntry OBJECT-TYPE SYNTAX GenEquipCurrentAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm information." INDEX { genEquipCurrentAlarmCounter } -- 1.3.6.1.4.1.1301.6.4.1.2.1 ::= { genEquipCurrentAlarmTable 1 } GenEquipCurrentAlarmEntry ::= SEQUENCE { genEquipCurrentAlarmCounter Counter32, genEquipCurrentAlarmRaiseTimeT TimeTicks, genEquipCurrentAlarmId Unsigned32, genEquipCurrentAlarmName DisplayString, genEquipCurrentAlarmInstance Unsigned32, genEquipCurrentAlarmSeverity AlarmSeverity, genEquipCurrentAlarmIfIndex INTEGER, genEquipCurrentAlarmModule AlarmModule, genEquipCurrentAlarmDesc DisplayString, genEquipCurrentAlarmProbableCause DisplayString, genEquipCurrentAlarmCorrectiveActions DisplayString, genEquipCurrentAlarmState AlarmState, genEquipCurrentAlarmSlotId Unsigned32 } genEquipCurrentAlarmCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Alarm index." -- 1.3.6.1.4.1.1301.6.4.1.2.1.1 ::= { genEquipCurrentAlarmEntry 1 } genEquipCurrentAlarmRaiseTimeT OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-create STATUS current DESCRIPTION "Alarm time (in timeticks from startup)." -- 1.3.6.1.4.1.1301.6.4.1.2.1.2 ::= { genEquipCurrentAlarmEntry 2 } genEquipCurrentAlarmId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Alarm ID and type (1-999)." -- 1.3.6.1.4.1.1301.6.4.1.2.1.3 ::= { genEquipCurrentAlarmEntry 3 } genEquipCurrentAlarmName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "Alarm name and title." -- 1.3.6.1.4.1.1301.6.4.1.2.1.4 ::= { genEquipCurrentAlarmEntry 4 } genEquipCurrentAlarmInstance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The current alarm history index (currently the instance number is always 1)." -- 1.3.6.1.4.1.1301.6.4.1.2.1.5 ::= { genEquipCurrentAlarmEntry 5 } genEquipCurrentAlarmSeverity OBJECT-TYPE SYNTAX AlarmSeverity MAX-ACCESS read-create STATUS current DESCRIPTION "Alarm severity from critical (1) to normal (5)." -- 1.3.6.1.4.1.1301.6.4.1.2.1.6 ::= { genEquipCurrentAlarmEntry 6 } genEquipCurrentAlarmIfIndex OBJECT-TYPE SYNTAX INTEGER { ethernet(1), air(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The physical interface that generated the alarm." -- 1.3.6.1.4.1.1301.6.4.1.2.1.7 ::= { genEquipCurrentAlarmEntry 7 } genEquipCurrentAlarmModule OBJECT-TYPE SYNTAX AlarmModule MAX-ACCESS read-create STATUS current DESCRIPTION "The module that generated the alarm." -- 1.3.6.1.4.1.1301.6.4.1.2.1.8 ::= { genEquipCurrentAlarmEntry 8 } genEquipCurrentAlarmDesc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Alarm textual description." -- 1.3.6.1.4.1.1301.6.4.1.2.1.9 ::= { genEquipCurrentAlarmEntry 9 } genEquipCurrentAlarmProbableCause OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Probable cause of the alarm." -- 1.3.6.1.4.1.1301.6.4.1.2.1.10 ::= { genEquipCurrentAlarmEntry 10 } genEquipCurrentAlarmCorrectiveActions OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Suggested corrective actions for the alarm." -- 1.3.6.1.4.1.1301.6.4.1.2.1.11 ::= { genEquipCurrentAlarmEntry 11 } genEquipCurrentAlarmState OBJECT-TYPE SYNTAX AlarmState MAX-ACCESS read-create STATUS current DESCRIPTION "Alarm state. When alarm is issued the state is 'open'. If the alarm is handled by the radio the state will change to 'process', and if the alarm was resolved the state will change to 'closed'. Only alarms that are handled automatically by the radio will change the state." -- 1.3.6.1.4.1.1301.6.4.1.2.1.12 ::= { genEquipCurrentAlarmEntry 12 } genEquipCurrentAlarmSlotId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the SU that generated the alarm. If the MU generated the alarm, the SlotId is 0." -- 1.3.6.1.4.1.1301.6.4.1.2.1.13 ::= { genEquipCurrentAlarmEntry 13 } genEquipTrapCfg OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.6.4.2 ::= { genEquipFault 2 } genEquipTrapCfgMgrTable OBJECT-TYPE SYNTAX SEQUENCE OF GenEquipTrapCfgMgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trap receiver configuration table (same as Trap receivers table - 1.3.6.1.4.1.1301.7.1)." -- 1.3.6.1.4.1.1301.6.4.2.1 ::= { genEquipTrapCfg 1 } genEquipTrapCfgMgrEntry OBJECT-TYPE SYNTAX GenEquipTrapCfgMgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trap receiver settings." INDEX { genEquipTrapCfgMgrId } -- 1.3.6.1.4.1.1301.6.4.2.1.1 ::= { genEquipTrapCfgMgrTable 1 } GenEquipTrapCfgMgrEntry ::= SEQUENCE { genEquipTrapCfgMgrId Unsigned32, genEquipTrapCfgMgrAdmin ActivationState, genEquipTrapCfgMgrIP InetAddress, genEquipTrapCfgMgrPort InetPortNumber, genEquipTrapCfgMgrName DisplayString, genEquipTrapCfgMgrCommunity DisplayString, genEquipTrapCfgMgrSeverityFilter AlarmSeverity, genEquipTrapCfgMgrHeartBeatPeriod Unsigned32 } genEquipTrapCfgMgrId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trap receiver index (up to 4 trap settings are allowed)." -- 1.3.6.1.4.1.1301.6.4.2.1.1.1 ::= { genEquipTrapCfgMgrEntry 1 } genEquipTrapCfgMgrAdmin OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-create STATUS current DESCRIPTION "Enable trap receiver entry." DEFVAL { off } -- 1.3.6.1.4.1.1301.6.4.2.1.1.2 ::= { genEquipTrapCfgMgrEntry 2 } genEquipTrapCfgMgrIP OBJECT-TYPE SYNTAX InetAddress (SIZE (0..4)) MAX-ACCESS read-create STATUS current DESCRIPTION "Trap receiver IP address. Support IPv4 only." -- 1.3.6.1.4.1.1301.6.4.2.1.1.3 ::= { genEquipTrapCfgMgrEntry 3 } genEquipTrapCfgMgrPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Trap receiver port." DEFVAL { 162 } -- 1.3.6.1.4.1.1301.6.4.2.1.1.4 ::= { genEquipTrapCfgMgrEntry 4 } genEquipTrapCfgMgrName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trap setting textual description." -- 1.3.6.1.4.1.1301.6.4.2.1.1.5 ::= { genEquipTrapCfgMgrEntry 5 } genEquipTrapCfgMgrCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) MAX-ACCESS read-create STATUS current DESCRIPTION "Trap community string." -- 1.3.6.1.4.1.1301.6.4.2.1.1.6 ::= { genEquipTrapCfgMgrEntry 6 } genEquipTrapCfgMgrSeverityFilter OBJECT-TYPE SYNTAX AlarmSeverity MAX-ACCESS read-create STATUS current DESCRIPTION "Filter traps according to severity of the alarm/event. The filter will pass traps with equal or higher severity. To pass all traps, set filter to normal (5)." -- 1.3.6.1.4.1.1301.6.4.2.1.1.7 ::= { genEquipTrapCfgMgrEntry 7 } genEquipTrapCfgMgrHeartBeatPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Heartbeat status trap period in seconds (default is 1 minute)." DEFVAL { 60 } -- 1.3.6.1.4.1.1301.6.4.2.1.1.10 ::= { genEquipTrapCfgMgrEntry 10 } genEquipEventLog OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.6.4.3 ::= { genEquipFault 3 } genEquipEventLogTable OBJECT-TYPE SYNTAX SEQUENCE OF GenEquipEventLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event log table." -- 1.3.6.1.4.1.1301.6.4.3.1 ::= { genEquipEventLog 1 } genEquipEventLogEntry OBJECT-TYPE SYNTAX GenEquipEventLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Event log settings." INDEX { genEquipEventLogCounter } -- 1.3.6.1.4.1.1301.6.4.3.1.1 ::= { genEquipEventLogTable 1 } GenEquipEventLogEntry ::= SEQUENCE { genEquipEventLogCounter Counter32, genEquipEventLogEventId Unsigned32, genEquipEventLogRaiseTimeT TimeTicks, genEquipEventLogSeverity AlarmSeverity, genEquipEventLogModule AlarmModule, genEquipEventLogDesc DisplayString, genEquipEventLogState AlarmState } genEquipEventLogCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Log index." -- 1.3.6.1.4.1.1301.6.4.3.1.1.1 ::= { genEquipEventLogEntry 1 } genEquipEventLogEventId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Event type." -- 1.3.6.1.4.1.1301.6.4.3.1.1.2 ::= { genEquipEventLogEntry 2 } genEquipEventLogRaiseTimeT OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-create STATUS current DESCRIPTION "Event time (in timeticks from startup)." -- 1.3.6.1.4.1.1301.6.4.3.1.1.3 ::= { genEquipEventLogEntry 3 } genEquipEventLogSeverity OBJECT-TYPE SYNTAX AlarmSeverity MAX-ACCESS read-create STATUS current DESCRIPTION "Event severity from critical (1) to normal (5)." -- 1.3.6.1.4.1.1301.6.4.3.1.1.4 ::= { genEquipEventLogEntry 4 } genEquipEventLogModule OBJECT-TYPE SYNTAX AlarmModule MAX-ACCESS read-create STATUS current DESCRIPTION "The module that generated the event." -- 1.3.6.1.4.1.1301.6.4.3.1.1.5 ::= { genEquipEventLogEntry 5 } genEquipEventLogDesc OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Event textual description." -- 1.3.6.1.4.1.1301.6.4.3.1.1.6 ::= { genEquipEventLogEntry 6 } genEquipEventLogState OBJECT-TYPE SYNTAX AlarmState MAX-ACCESS read-create STATUS current DESCRIPTION "Event state. When event is issued the state is 'open'. If the event is handled by the radio the state will change to 'process', and if the eventwas resolved the state will change to 'closed'. Only events that are handled automatically by the radio will change the state." -- 1.3.6.1.4.1.1301.6.4.3.1.1.7 ::= { genEquipEventLogEntry 7 } genEquipEventLogClear OBJECT-TYPE SYNTAX INTEGER { noop(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear event log." -- 1.3.6.1.4.1.1301.6.4.3.2 ::= { genEquipEventLog 2 } genEquipFaultErrno OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last general error fault number." -- 1.3.6.1.4.1.1301.6.4.4 ::= { genEquipFault 4 } genEquipFaultErrDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The last fault description." -- 1.3.6.1.4.1.1301.6.4.5 ::= { genEquipFault 5 } operClearCtrs OBJECT-TYPE SYNTAX INTEGER { noop(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear Running Counters" -- 1.3.6.1.4.1.1301.6.5 ::= { operations 5} firmwareManagement OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.6.6 ::= { operations 6 } activateAlternate OBJECT-TYPE SYNTAX INTEGER { noop(1), activate(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Activate alternate firmware." -- 1.3.6.1.4.1.1301.6.6.1 ::= { firmwareManagement 1 } swDownloadTable OBJECT-TYPE SYNTAX SEQUENCE OF SwDownloadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains maximum of one entry representing a software download process that is either currently in progress or was completed. A management station can create an entry only if the table is empty or the only entry is for a download that was completed. An attempt to create or write this entry while download is in progress results in 'resourceUnavailable' error status. The swDownloadStatus state object is used to control and monitor software download process. Setting it to the 'download' value starts a new software download (if no download is active at that time). Note: Use the same process in order to download a license (instead of firmware file, use a license file)." -- 1.3.6.1.4.1.1301.6.6.2 ::= { firmwareManagement 2 } swDownloadEntry OBJECT-TYPE SYNTAX SwDownloadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Current or last software download information." INDEX { swDownloadIndex } -- 1.3.6.1.4.1.1301.6.6.2.1 ::= { swDownloadTable 1 } SwDownloadEntry ::= SEQUENCE { swDownloadIndex INTEGER, swDownloadTftpAddressType InetAddressType, swDownloadTftpAddress InetAddress, swDownloadTftpFile DisplayString, swDownloadStatus INTEGER, swDownloadTimeEnded DateAndTime, swDownloadFailureReason DisplayString } swDownloadIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Software download table index (the only allowed value is 1)." -- 1.3.6.1.4.1.1301.6.6.2.1.1 ::= { swDownloadEntry 1 } swDownloadTftpAddressType OBJECT-TYPE SYNTAX InetAddressType { ipv4(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The INET address type of the TFTP server. Support IPv4 only." -- 1.3.6.1.4.1.1301.6.6.2.1.2 ::= { swDownloadEntry 2 } swDownloadTftpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The TFTP server IP address." -- 1.3.6.1.4.1.1301.6.6.2.1.3 ::= { swDownloadEntry 3 } swDownloadTftpFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Full software file path name (as required by the TFTP server)." -- 1.3.6.1.4.1.1301.6.6.2.1.6 ::= { swDownloadEntry 6 } swDownloadStatus OBJECT-TYPE SYNTAX INTEGER { download(1), validate(2), commit(3), success(4), fail(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Current or last software download status." -- 1.3.6.1.4.1.1301.6.6.2.1.7 ::= { swDownloadEntry 7 } swDownloadTimeEnded OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-create STATUS current DESCRIPTION "Date and time when software download completed." -- 1.3.6.1.4.1.1301.6.6.2.1.8 ::= { swDownloadEntry 8 } swDownloadFailureReason OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "In case software download failed - short explanation the reason. In case of success - this object will contain empty string." -- 1.3.6.1.4.1.1301.6.6.2.1.9 ::= { swDownloadEntry 9 } trapDefinitions OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.7 ::= { telradBREEZEAIR 7 } -- Trap receivers table ------------------------------------ trapReceiversTable OBJECT-TYPE SYNTAX SEQUENCE OF TrapReceiversEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trap receiver configuration table." -- 1.3.6.1.4.1.1301.7.1 ::= { trapDefinitions 1 } trapReceiversEntry OBJECT-TYPE SYNTAX TrapReceiversEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trap receiver settings." INDEX { trapReceiverNumber } -- 1.3.6.1.4.1.1301.7.1.1 ::= { trapReceiversTable 1 } TrapReceiversEntry ::= SEQUENCE { trapReceiverNumber Unsigned32, trapEnabled ActivationState, trapReceiverIPAddress InetAddress, trapCommunity DisplayString, trapReceiversPortNumber InetPortNumber, trapReceiversFilter AlarmSeverity, trapReceiversPeriod Unsigned32 } trapReceiverNumber OBJECT-TYPE SYNTAX Unsigned32 (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Trap receiver index (up to 4 trap settings are allowed)." -- 1.3.6.1.4.1.1301.7.1.1.1 ::= { trapReceiversEntry 1 } trapEnabled OBJECT-TYPE SYNTAX ActivationState MAX-ACCESS read-create STATUS current DESCRIPTION "Enable trap receiver entry." DEFVAL { off } -- 1.3.6.1.4.1.1301.7.1.1.2 ::= { trapReceiversEntry 2 } trapReceiverIPAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0..4)) MAX-ACCESS read-create STATUS current DESCRIPTION "Trap receiver IP address. Support IPv4 only." -- 1.3.6.1.4.1.1301.7.1.1.3 ::= { trapReceiversEntry 3 } trapCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) MAX-ACCESS read-create STATUS current DESCRIPTION "Trap community string." -- 1.3.6.1.4.1.1301.7.1.1.4 ::= { trapReceiversEntry 4 } trapReceiversPortNumber OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Trap receiver port." DEFVAL { 162 } -- 1.3.6.1.4.1.1301.7.1.1.5 ::= { trapReceiversEntry 5 } trapReceiversFilter OBJECT-TYPE SYNTAX AlarmSeverity MAX-ACCESS read-create STATUS current DESCRIPTION "Filter traps according to severity of the alarm/event. The filter will pass traps with equal or higher severity. To pass all traps, set filter to normal (5)." -- 1.3.6.1.4.1.1301.7.1.1.6 ::= { trapReceiversEntry 6 } trapReceiversPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Heartbeat status trap period in seconds (default is 1 minute)." DEFVAL { 60 } -- 1.3.6.1.4.1.1301.7.1.1.7 ::= { trapReceiversEntry 7 } traps OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.8 ::= { telradBREEZEAIR 8 } breezeairConformance OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.9 ::= { telradBREEZEAIR 9 } breezeairGroups OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.9.1 ::= { breezeairConformance 1 } breezeairCompls OBJECT IDENTIFIER -- 1.3.6.1.4.1.1301.9.2 ::= { breezeairConformance 2 } -- breezeair traps ------------------------------------ alarmWasIssuedTrap NOTIFICATION-TYPE OBJECTS { alarmID, genEquipEventLogEventId, genEquipEventLogRaiseTimeT, genEquipEventLogSeverity, genEquipEventLogModule, genEquipEventLogDesc, genEquipEventLogState, peerMac, peerIPAddress, peerNumber} STATUS current DESCRIPTION "An alarmWasIssuedTrap signifies that the unit issued an alarm with the specified parameters." -- 1.3.6.1.4.1.1301.8.1 ::= { traps 1 } peerStateChanged NOTIFICATION-TYPE OBJECTS { peerOnline, genEquipEventLogEventId, genEquipEventLogRaiseTimeT, genEquipEventLogSeverity, genEquipEventLogModule, genEquipEventLogDesc, genEquipEventLogState, peerMac, peerIPAddress, peerNumber} STATUS current DESCRIPTION "This trap indicates the peer becomes online or offline." -- 1.3.6.1.4.1.1301.8.2 ::= { traps 2 } txRateChanged NOTIFICATION-TYPE OBJECTS { peerCurTxRate, genEquipEventLogEventId, genEquipEventLogRaiseTimeT, genEquipEventLogSeverity, genEquipEventLogModule, genEquipEventLogDesc, genEquipEventLogState} STATUS current DESCRIPTION "This trap indicates unit transmission rate was changed (on adaptive modulation mode)." -- 1.3.6.1.4.1.1301.8.3 ::= { traps 3 } rxRateChanged NOTIFICATION-TYPE OBJECTS { peerCurRxRate, genEquipEventLogEventId, genEquipEventLogRaiseTimeT, genEquipEventLogSeverity, genEquipEventLogModule, genEquipEventLogDesc, genEquipEventLogState} STATUS current DESCRIPTION "This trap indicates the peer unit transmission rate was changed (on adaptive modulation mode)." -- 1.3.6.1.4.1.1301.8.4 ::= { traps 4 } dfsEvent NOTIFICATION-TYPE OBJECTS { dfs, genEquipEventLogEventId, genEquipEventLogRaiseTimeT, genEquipEventLogSeverity, genEquipEventLogModule, genEquipEventLogDesc, genEquipEventLogState, macAddress, ipAddress} STATUS current DESCRIPTION "This trap indicates the DFS mechanism detected radar signal." -- 1.3.6.1.4.1.1301.8.5 ::= { traps 5 } heartBeatEvent NOTIFICATION-TYPE OBJECTS { status, genEquipEventLogEventId, genEquipEventLogRaiseTimeT, genEquipEventLogSeverity, genEquipEventLogModule, genEquipEventLogDesc, genEquipEventLogState, macAddress, ipAddress} STATUS current DESCRIPTION "Status trap to signal the unit is alive (trap period is configured in the trap receiver table)." -- 1.3.6.1.4.1.1301.8.6 ::= { traps 6 } siduEvent NOTIFICATION-TYPE OBJECTS { siduPortNumber,siduPortLocalErr,siduPortRemoteErr, genEquipEventLogEventId, genEquipEventLogRaiseTimeT, genEquipEventLogSeverity, genEquipEventLogModule, genEquipEventLogDesc, genEquipEventLogState, macAddress, ipAddress} STATUS current DESCRIPTION "This trap indicates a Loss of Signal in S-IDU ports." -- 1.3.6.1.4.1.1301.8.7 ::= { traps 7 } ethLinkEvent NOTIFICATION-TYPE OBJECTS { ethernetDataPortIndex, genEquipEventLogEventId, genEquipEventLogRaiseTimeT, genEquipEventLogSeverity, genEquipEventLogModule, genEquipEventLogDesc, genEquipEventLogState, ethernetDataPortStatus, macAddress, ipAddress} STATUS current DESCRIPTION "This trap indicates Ethernet port changed state (connected/disconnected)." -- 1.3.6.1.4.1.1301.8.8 ::= { traps 8 } coldStartEvent NOTIFICATION-TYPE OBJECTS { mode, genEquipEventLogEventId, genEquipEventLogRaiseTimeT, genEquipEventLogSeverity, genEquipEventLogModule, genEquipEventLogDesc, genEquipEventLogState, macAddress, ipAddress} STATUS current DESCRIPTION "This trap indicates the unit performed power cycle (cold start)" -- 1.3.6.1.4.1.1301.8.9 ::= { traps 9 } nmsHeartBeatEvent NOTIFICATION-TYPE OBJECTS { nmsHeartBeatInfo, genEquipEventLogEventId, genEquipEventLogRaiseTimeT, genEquipEventLogSeverity, genEquipEventLogModule, genEquipEventLogDesc, genEquipEventLogState, nmsUnitInfo, nmsSlaInfo, nmsMonitoringInfo} STATUS current DESCRIPTION "Status trap used with NMS." -- 1.3.6.1.4.1.1301.8.10 ::= { traps 10 } siduEthLinkEvent NOTIFICATION-TYPE OBJECTS { siduEthPortIndex, genEquipEventLogEventId, genEquipEventLogRaiseTimeT, genEquipEventLogSeverity, genEquipEventLogModule, genEquipEventLogDesc, genEquipEventLogState, siduEthPortStatus, macAddress, ipAddress} STATUS current DESCRIPTION "This trap indicates Ethernet port changed state (connected/disconnected)." -- 1.3.6.1.4.1.1301.8.11 ::= { traps 11 } nmsRadioLinkEvent NOTIFICATION-TYPE OBJECTS { trapNmsRecordAlarmId, trapNmsRecordAlarmOccurence, trapNmsRecordAlarmSeverity, trapNmsRecordAlarmModule, trapNmsRecordDeviceName, trapNmsRecordAlarmDescription, trapNmsRecordDeviceState, trapNmsRecordDeviceMac, trapNmsRecordDeviceIp, trapNmsRecordDeviceIndex} STATUS current DESCRIPTION "NMS detected/informed radio online/offline." -- 1.3.6.1.4.1.1301.8.20 ::= { traps 20 } nmsRadioResetEvent NOTIFICATION-TYPE OBJECTS { trapNmsRecordAlarmId, trapNmsRecordAlarmOccurence, trapNmsRecordAlarmSeverity, trapNmsRecordAlarmModule, trapNmsRecordDeviceName, trapNmsRecordAlarmDescription, trapNmsRecordDeviceState, trapNmsRecordDeviceMac, trapNmsRecordDeviceIp, trapNmsRecordDeviceIndex} STATUS current DESCRIPTION "NMS detected Radio performed a RESET (WarmStart)" -- 1.3.6.1.4.1.1301.8.21 ::= { traps 21 } nmsRSSIEvent NOTIFICATION-TYPE OBJECTS { trapNmsRecordAlarmId, trapNmsRecordAlarmOccurence, trapNmsRecordAlarmSeverity, trapNmsRecordAlarmModule, trapNmsRecordDeviceName, trapNmsRecordAlarmDescription, trapNmsRecordDeviceState, trapNmsRecordDeviceMac, trapNmsRecordDeviceIp, trapNmsRecordDeviceIndex} STATUS current DESCRIPTION "NMS detected RSSI event (Cut-Off or Saturation)" -- 1.3.6.1.4.1.1301.8.22 ::= { traps 22 } nmsUtilizationEvent NOTIFICATION-TYPE OBJECTS { trapNmsRecordAlarmId, trapNmsRecordAlarmOccurence, trapNmsRecordAlarmSeverity, trapNmsRecordAlarmModule, trapNmsRecordDeviceName, trapNmsRecordAlarmDescription, trapNmsRecordDeviceState, trapNmsRecordDeviceMac, trapNmsRecordDeviceIp, trapNmsRecordDeviceIndex} STATUS current DESCRIPTION "NMS detected capacity overload event" -- 1.3.6.1.4.1.1301.8.23 ::= { traps 23 } nmsColdStartEvent NOTIFICATION-TYPE OBJECTS { trapNmsRecordAlarmId, trapNmsRecordAlarmOccurence, trapNmsRecordAlarmSeverity, trapNmsRecordAlarmModule, trapNmsRecordDeviceName, trapNmsRecordAlarmDescription, trapNmsRecordDeviceState, trapNmsRecordDeviceMac, trapNmsRecordDeviceIp, trapNmsRecordDeviceIndex} STATUS current DESCRIPTION "This trap indicates the unit performed power cycle (cold start)" -- 1.3.6.1.4.1.1301.8.24 ::= { traps 24 } nmsEthLinkEvent NOTIFICATION-TYPE OBJECTS { trapNmsRecordAlarmId, trapNmsRecordAlarmOccurence, trapNmsRecordAlarmSeverity, trapNmsRecordAlarmModule, trapNmsRecordDeviceName, trapNmsRecordAlarmDescription, trapNmsRecordDeviceState, trapNmsRecordDeviceMac, trapNmsRecordDeviceIp, trapNmsRecordDeviceIndex} STATUS current DESCRIPTION "This trap indicates Ethernet port changed state (connected/disconnected)." -- 1.3.6.1.4.1.1301.8.25 ::= { traps 25 } nmsSiduEvent NOTIFICATION-TYPE OBJECTS { trapNmsRecordAlarmId, trapNmsRecordAlarmOccurence, trapNmsRecordAlarmSeverity, trapNmsRecordAlarmModule, trapNmsRecordDeviceName, trapNmsRecordAlarmDescription, trapNmsRecordDeviceState, trapNmsRecordDeviceMac, trapNmsRecordDeviceIp, trapNmsRecordDeviceIndex} STATUS current DESCRIPTION "This trap indicates a Loss of Signal in S-IDU ports." -- 1.3.6.1.4.1.1301.8.26 ::= { traps 26 } nmsDfsEvent NOTIFICATION-TYPE OBJECTS { trapNmsRecordAlarmId, trapNmsRecordAlarmOccurence, trapNmsRecordAlarmSeverity, trapNmsRecordAlarmModule, trapNmsRecordDeviceName, trapNmsRecordAlarmDescription, trapNmsRecordDeviceState, trapNmsRecordDeviceMac, trapNmsRecordDeviceIp, trapNmsRecordDeviceIndex} STATUS current DESCRIPTION "This trap indicates the DFS mechanism detected radar signal." -- 1.3.6.1.4.1.1301.8.27 ::= { traps 27 } nmsSiduEthLinkEvent NOTIFICATION-TYPE OBJECTS { trapNmsRecordAlarmId, trapNmsRecordAlarmOccurence, trapNmsRecordAlarmSeverity, trapNmsRecordAlarmModule, trapNmsRecordDeviceName, trapNmsRecordAlarmDescription, trapNmsRecordDeviceState, trapNmsRecordDeviceMac, trapNmsRecordDeviceIp, trapNmsRecordDeviceIndex} STATUS current DESCRIPTION "This trap indicates Ethernet port changed state (connected/disconnected)." -- 1.3.6.1.4.1.1301.8.11 ::= { traps 28 } END