Index: includes/definitions/os.inc.php =================================================================== --- includes/definitions/os.inc.php (revision 10258) +++ includes/definitions/os.inc.php (working copy) @@ -1136,6 +1136,63 @@ $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.2928.1."; $config['os'][$os]['graphs'][] = "device_bits"; + +// westermo + +$os = "westermo-lynx"; +$config['os'][$os]['text'] = "Westermo Lynx"; +$config['os'][$os]['vendor'] = "westermo"; +$config['os'][$os]['type'] = "network"; +//$config['os'][$os]['model'] = "westermo"; +$config['os'][$os]['graphs'][] = "device_bits"; +$config['os'][$os]['graphs'][] = "device_ping"; +$config['os'][$os]['graphs'][] = "device_uptime"; +$config['os'][$os]['graphs'][] = "device_temperature"; +$config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.16177.1"; // L408F2 +$config['os'][$os]['mib_blacklist'][] = "UCD-SNMP-MIB"; +$config['os'][$os]['mib_blacklist'][] = "CISCO-CDP-MIB"; +$config['os'][$os]['mib_blacklist'][] = "BGP4-MIB"; +$config['os'][$os]['mib_blacklist'][] = "ADSL-LINE-MIB"; +$config['os'][$os]['mib_blacklist'][] = "DISMAN-PING-MIB"; +$config['os'][$os]['mib_blacklist'][] = "MIB-Dell-10892"; +$config['os'][$os]['mib_blacklist'][] = "LSI-MegaRAID-SAS-MIB"; +$config['os'][$os]['mib_blacklist'][] = "SUPERMICRO-HEALTH-MIB"; +$config['os'][$os]['mib_blacklist'][] = "CPQSINFO-MIB"; +$config['os'][$os]['mib_blacklist'][] = "OSPF-MIB"; +$config['os'][$os]['mib_blacklist'][] = "LLDP-MIB"; +$config['os'][$os]['mib_blacklist'][] = "IPV6-MIB"; +$config['os'][$os]['mib_blacklist'][] = "PW-STD-MIB"; +$config['os'][$os]['mib_blacklist'][] = "HOST-RESOURCES-MIB"; +$config['os'][$os]['mib_blacklist'][] = "EtherLike-MIB"; +$config['os'][$os]['mib_blacklist'][] = "ENTITY-SENSOR-MIB"; +$config['os'][$os]['mib_blacklist'][] = "ENTITY-MIB"; +$config['os'][$os]['mibs'][] = "WESTERMO-LYNX-MIB"; + + + + +// On Time Network + +$os = "Ontime"; +$config['os'][$os]['text'] = "On Time Network"; +$config['os'][$os]['vendor'] = "OnTimeNetwork"; +$config['os'][$os]['type'] = "network"; +$config['os'][$os]['model'] = "ontime"; +$config['os'][$os]['graphs'][] = "device_bits"; +$config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.34753"; +/* +$config['os'][$os]['mib_blacklist'][] = "UCD-SNMP-MIB"; +$config['os'][$os]['mib_blacklist'][] = "CISCO-CDP-MIB"; +$config['os'][$os]['mib_blacklist'][] = "BGP4-MIB"; +$config['os'][$os]['mib_blacklist'][] = "ADSL-LINE-MIB"; +$config['os'][$os]['mib_blacklist'][] = "DISMAN-PING-MIB"; +$config['os'][$os]['mib_blacklist'][] = "MIB-Dell-10892"; +$config['os'][$os]['mib_blacklist'][] = "LSI-MegaRAID-SAS-MIB"; +$config['os'][$os]['mib_blacklist'][] = "SUPERMICRO-HEALTH-MIB"; +$config['os'][$os]['mib_blacklist'][] = "CPQSINFO-MIB"; +$config['os'][$os]['mib_blacklist'][] = "OSPF-MIB"; +*/ + // Supermicro Switch $os = "supermicro-switch"; @@ -2861,18 +2918,7 @@ $config['os'][$os]['graphs'][] = "device_power"; $config['os'][$os]['mibs'][] = "JANITZA-MIB"; -// Lantech -$os = "lantech-switch"; -$config['os'][$os]['text'] = "Lantech Switch"; -$config['os'][$os]['vendor'] = "Lantech"; -$config['os'][$os]['type'] = "network"; -$config['os'][$os]['model'] = "lantech"; // Per-HW MIBs and hardware names -$config['os'][$os]['remote_access'] = array('ssh', 'http', 'telnet'); -$config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.37072.302.2"; // ipes-2208ca -$config['os'][$os]['mib_blacklist'] = array("UCD-SNMP-MIB", "CISCO-CDP-MIB", "BGP4-MIB", "ADSL-LINE-MIB", "DISMAN-PING-MIB", - "SUPERMICRO-HEALTH-MIB", "CPQSINFO-MIB", "HOST-RESOURCES-MIB", "OSPF-MIB"); - // NTI $os = "enviromux"; @@ -3521,9 +3567,22 @@ $config['os'][$os]['type'] = "power"; $config['os'][$os]['graphs'][] = "device_current"; $config['os'][$os]['graphs'][] = "device_voltage"; +$config['os'][$os]['graphs'][] = "device_load"; +$config['os'][$os]['graphs'][] = "device_ping"; $config['os'][$os]['mibs'][] = "UPS-MIB"; $config['os'][$os]['mib_blacklist'][] = "BGP4-MIB"; +$config['os'][$os]['mib_blacklist'][] = "ADSL-LINE-MIB"; +$config['os'][$os]['mib_blacklist'][] = "CISCO-CDP-MIB"; +$config['os'][$os]['mib_blacklist'][] = "DISMAN-PING-MIB"; +$config['os'][$os]['mib_blacklist'][] = "ENTITY-MIB"; +$config['os'][$os]['mib_blacklist'][] = "ENTITY-SENSOR-MIB"; $config['os'][$os]['mib_blacklist'][] = "HOST-RESOURCES-MIB"; +$config['os'][$os]['mib_blacklist'][] = "IF-MIB"; +$config['os'][$os]['mib_blacklist'][] = "IP-MIB"; +$config['os'][$os]['mib_blacklist'][] = "IPV6-MIB"; +$config['os'][$os]['mib_blacklist'][] = "LLDP-MIB"; +$config['os'][$os]['mib_blacklist'][] = "Q-BRIDGE-MIB"; +$config['os'][$os]['mib_blacklist'][] = "UCD-SNMP-MIB"; $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.5491.1"; $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.5491.6"; $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.5491.306"; @@ -4102,6 +4161,38 @@ $config['os'][$os]['mibs'][] = "TRAPEZE-NETWORKS-AP-STATUS-MIB"; $config['os'][$os]['mibs'][] = "TRAPEZE-NETWORKS-AP-CONFIG-MIB"; +// Lancom devices - lcos is new, unified-MIB software. The others are legacy bullshit. + +/* +$os = "lcos"; +$config['os'][$os]['text'] = "LCOS"; +$config['os'][$os]['vendor'] = "Lancom"; +$config['os'][$os]['type'] = "voip"; +$config['os'][$os]['ifname'] = TRUE; +$config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.2356.11"; +$config['os'][$os]['mibs'][] = "LCOS-MIB"; + +*/ +$os = "lcos-1723"; +$config['os'][$os]['text'] = "LCOS-1723"; +$config['os'][$os]['vendor'] = "Lancom"; +$config['os'][$os]['type'] = "voip"; +$config['os'][$os]['ifname'] = TRUE; +$config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.2356.500"; +$config['os'][$os]['mibs'][] = "LANCOM-1723-MIB"; + +/* +$os = "lcos-old"; +$config['os'][$os]['text'] = "LCOS (OLD)"; +$config['os'][$os]['vendor'] = "Lancom"; +$config['os'][$os]['type'] = "voip"; +$config['os'][$os]['ifname'] = TRUE; +$config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.2356.600"; +$config['os'][$os]['model'] = "lancom"; +//$config['os'][$os]['mibs'][] = "LCOS-1723-MIB"; +*/ + + $os = "netio-pdu"; $config['os'][$os]['text'] = "NetIO"; $config['os'][$os]['type'] = "power"; @@ -4561,6 +4652,7 @@ $os = "smartware"; $config['os'][$os]['text'] = "Patton Smartnode"; +$config['os'][$os]['model'] = "Patton Smartnode"; $config['os'][$os]['vendor'] = "Patton"; $config['os'][$os]['type'] = "voip"; $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.1768.100.4."; @@ -5453,6 +5545,77 @@ $config['os'][$os]['mibs'][] = "EIP-MON-MIB"; //$config['os'][$os]['mibs'][] = "EIP-MON-MIB"; + +// PHOENIX CONTACT + +$os = "phoenixContact"; +$config['os'][$os]['text'] = "Phoenix Contact"; +$config['os'][$os]['vendor'] = "Phoenix Contact"; +$config['os'][$os]['type'] = "other"; //PLS +$config['os'][$os]['graphs'][] = "device_bits"; +$config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.4346.11"; + +// Lantech + +$os = "Lantech"; +$config['os'][$os]['text'] = "Lantech Switch"; +$config['os'][$os]['vendor'] = "Lantech"; +$config['os'][$os]['type'] = "network"; +$config['os'][$os]['model'] = "lantech"; +$config['os'][$os]['graphs'][] = "device_bits"; +$config['os'][$os]['ifname'] = 1; +$config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.37072.302.2"; +//$config['os'][$os]['mib_blacklist'][] = "UCD-SNMP-MIB"; +$config['os'][$os]['mib_blacklist'][] = "CISCO-CDP-MIB"; +$config['os'][$os]['mib_blacklist'][] = "BGP4-MIB"; +$config['os'][$os]['mib_blacklist'][] = "ADSL-LINE-MIB"; +$config['os'][$os]['mib_blacklist'][] = "DISMAN-PING-MIB"; +$config['os'][$os]['mib_blacklist'][] = "MIB-Dell-10892"; +$config['os'][$os]['mib_blacklist'][] = "LSI-MegaRAID-SAS-MIB"; +$config['os'][$os]['mib_blacklist'][] = "SUPERMICRO-HEALTH-MIB"; +$config['os'][$os]['mib_blacklist'][] = "CPQSINFO-MIB"; +$config['os'][$os]['mib_blacklist'][] = "OSPF-MIB"; +$config['os'][$os]['modules']['bgp-peers'] = 0; +$config['os'][$os]['modules']['mac-accounting'] = 0; +$config['os'][$os]['modules']['cisco-cbqos'] = 0; +$config['os'][$os]['modules']['wifi'] = 0; +$config['os'][$os]['modules']['p2p-radios'] = 0; +$config['os'][$os]['modules']['wifi'] = 0; +$config['os'][$os]['modules']['virtual-machines'] = 0; +$config['os'][$os]['modules']['junose-atm-vp'] = 0; +$config['os'][$os]['modules']['sla'] = 0; +$config['os'][$os]['modules']['printersupplies'] = 0; + + // Korenix // EOF